Tools we have: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(Added Kent's new tool form)
 
(616 intermediate revisions by 41 users not shown)
Line 1: Line 1:
==Notes==
Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!


Fill in any data you know of/own in the following suggested format (alphabetically):
Alternatively, you can use this link to automatically populate a new tool page! https://my.protospace.ca/add-new-tool
# Tool Name (Brand/Color)
# Tool Owner/Donator name if any.
# Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
# Tool Status (working/needs fixing/finicky/etc)
# Tool Use Restrictions (Open to all, ask owner first, read instructions first, must be trained/certified).


Please add pictures too.  
We can always use new tools. Your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum]. Please feel free to [[contact information|contact Protospace]] to arrange a tool donation.  


Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.
We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].


Treat tools with respect and care! Also clean them up and put them back before you leave :)
__TOC__


==3D Printing/Cutting Tools==
==3D Printers==
{{hatnote|Comparisons: [[our 3D printers]]}}


* [http://farm7.staticflickr.com/6051/6374307163_30109e8947_o.jpg 80W Chinese Laser Cutter with a 4' x 3' cutting area] http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* [http://farm8.staticflickr.com/7033/6579843923_19329e76cb_z.jpg RapMan 3D Printer] - Brian Queen - ?? - ?? - ??
File:182.jpg|link=182|[[3D Printer, FFF (Bambu Lab P1S) ID:182]]
* Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
</gallery>


==Automotive Tools==
==Laser Cutters==
{{hatnote|Comparisons: [[our laser cutters]]}}


* Compressor (big) - ?? - ?? - Engine needs fixing - ??
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* Floor Jack (Certified/blue) - Tremaine "Dexter" - semi-permanent loan - Working - Open To All
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
* Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
</gallery>


==Electronics Tools==
==Wood/Plastic CNC's==


* Oscilloscope (Kikusui COS5060 60Mhz) - ?? - ?? - ??
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
* Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
* Compressor (small/black) - circuithacker & 19200baud - Donated to PS - Working, but needs air tank & pressure switch to be complete - Intended for use with the Pick & Place primarily, if more info needed  contact circuithacker at circuithacker@botzone.ca
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>


==Metalworking Tools==
==Automotive tools==


* Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
File:8.jpg|link=8|[[Floor jack, blue ID:8]]
* Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
File:9.jpg|link=9|[[Trolley jack and axle stand kit (Certified) ID:9]]
* Drill Press - ?? - PS Owned - Working - ??
File:11.jpg|link=11|[[Socket set ID:11]]
* Forge  - ?? - ?? - ?? - ??
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
* Mill (big) (Craftex/Green) - ?? - ?? - Needs Gear Fix - ??
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
* [http://farm7.staticflickr.com/6239/6374306473_dbbca442d3_o.jpg Mill (small CNC) (MAXNC 10/blue)] - Brian Queen - ?? - ?? - ??
</gallery>
* Tap & Die set (Mastercraft) - ?? - ?? - Working - ??
* Vice (Irwin) - ?? - ?? - Working - ??


==Woodworking/Plastic Tools==
==Electronics equipment==


* Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* Cutoff Saw (B&D) - ?? - ?? - Working - ??
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
* Cutoff Saw (Red) - ?? - ?? - ?? - ??
File:16.jpg|[[Function generator (John's) ID:16]]
* Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
* Corded Dremel & Accessories - ?? - ?? - Working - ??
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
* Cordless Drill (Orange) - ?? - ?? - Working - ??
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
* Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
* Jiggaw (Skil/Black) - ?? - ?? - Working - ??
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
* Planer - ?? - ?? - ?? - ??
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
* Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
* Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
* Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
* Workmate - ?? - ?? - Working - ??
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]


==Misc Tools==
</gallery>


* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
==Metalworking tools==
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Shop Vac (Orange) - ?? - ?? - ??
* Vacuum Former - ?? - ?? - Needs serious fixing/case - ??


<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:35.jpg|link=35|[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|link=37|[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|link=165|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg|link=39|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg|link=40|[[Bench grinder (Trademaster PR14210) ID:40]]
File:42.jpg|link=42|[[Drill press (Mastercraft) ID:42]]
File:45.jpg|link=45|[[Foundry, propane ID:45]]
File:121.jpg|link=121|[[Hydraulic press, 50-ton, electric ID:121]]
File:46.jpg|link=46|[[Lathe, metal (Challenger 1660G) ID:46]]
File:47.jpg|link=47|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:53.jpg|link=53|[[Metal shear (Magnum) ID:53]]
File:48.jpg|link=48|[[Milling machine (ACRA AM4V) ID:48]]
File:49.jpg|link=49|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:173.png|link=173|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:51.jpg|link=51|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|link=52|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|link=54|[[Vise, giant ID:54]]
File:56.jpg|link=56|[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|link=Metalworking pattern maker's vise|[[Metalworking pattern maker's vise]]
File:Metal drill press.jpg|link=HD gear driven drill press/mill|[[HD gear driven drill press/mill]]
File:163.jpg|link=163|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|link=180|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
File:187.png|link=187|[[Welder, TIG, Everlast PowerTIG 250EX ID:187]]
File:198.png|link=198|[[Indexable_carbide_lathe_tool_holders_-_imported_(Assorted)_ID:198]]
</gallery>


==Old Content To Be Merged With Above==
==Woodworking and plasticworking tools==


===Protospace tools===
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* [http://farm7.staticflickr.com/6096/6374306633_408dc5271e_o.jpg Makerbot cupcake CNC]
File:171-Wood-Lathe-Jet.jpg|link=171|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg|link=57|[[Bandsaw, green ID:57]]
File:61.jpg|link=61|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|link=62|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:68.jpg|link=68|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|link=69|[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|link=70|[[Jigsaw, corded (Black & Decker) ID:70]]
File:72.jpg|link=72|[[Jigsaw (Skil) ID:72]]
File:75.jpg|link=75|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:76.jpg|link=76|[[Plate joiner (Porter Cable 557) ID:76]]
File:140.jpg|link=140|[[Pocket hole jig (Kreg K3) ID:140]]
File:78.jpg|link=78|[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|link=79|[[Rotary tool, cordless (Dremel) ID:79]]
File:124.jpg|link=124|[[Router table (Jeff's) ID:124]]
File:83.jpg|link=83|[[Sander, belt (Makita 9402) ID:83]]
File:85.jpg|link=85|[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|link=106|[[Sander, drum (General International 15-250 M1) ID:106]]
File:138.jpg|link=138|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:139.jpg|link=139|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:88.jpg|link=88|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:92.jpg|link=92|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|link=89|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|link=|[[Vise, wood ID:94]]
File:95.jpg|link=95|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|link=185|[[Jointer, 6-Inch ID:185]]
File:DeWalt sliding compound miter saw.jpg|link=186|[[Miter saw, compound, sliding (DeWalt) ID:186]]
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|link=149|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|link=164|[[Handheld metal detector ID:164]]
File:168.jpg|link=168|[[Planer, 16" Auto Planer]]
File:172.jpg|link=172|[[Table saw (SawStop) ID:172]]
File:174.jpg|link=174|[[drying rack (coyle-made) ID:174]]
File:193.jpeg|link=193|[[Wood_lathe,_variable_speed_(Craftex_CX802)_ID:193]]
File:194.jpeg|link=194|[[Sander,_belt/disc_(Magnum_MI-16300)_ID:194]]
File:195.jpeg|link=195|[[Bandsaw_(General_International_90-270M1)_ID:195]]
File:196.jpeg|link=196|[[Spindle_sander_(Magnum_Industrial_MH-16100)_ID:196]]
File:189.jpeg|link=189|[[Hand_planes_(mostly_stanley,_block_plane)_ID:189]]
</gallery>


===Member tools and gadgets===
==Textile, Leather, Vinyl, and Media tools==
Tremaine:
* 4 1 ton vehicle jack stands
* metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
* metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
* metric crescent wrenches 8mm - 24mm
* variety of wrenches, standard screwdrivers
* Metric hex key set
* tap & die set
* Heat gun
* Torque wrench
* Breaker bar with 1/2" driver


(more to be added)
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:120.jpg|link=120|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:183.png|link=183|[[Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183]]
File:184.jpg|link=184|[[Skiving Machine, Bell Knife, (Techsew SK-4) ID:184]]
File:Singer 211G155.jpg|link=147|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:144.jpg|link=144|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:150.jpg|link=150|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:156.jpg|link=156|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|link=157|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|link=158|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|link=148|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:191.jpeg|link=191|[[Cutter,_vinyl/paper/fabric_(Silhouette_Cameo_3)_ID:191]]
File:154.jpg|link=154|[[Heat press, digital (Geo Knight and Co Inc K20S) ID:154]]
File:155.jpg|link=155|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:190.jpeg|link=190|[[Dye_sub_printer_(Epson_SureColor_F170)_ID:190]]
File:192.jpeg|link=192|[[Mug_heat_press_(Vevor_F320)_ID:192]]
File:201.jpeg|link=201|[[Sheetfeed document and photo scanner (Fujitsu ScanSnap S1500) ID:201]]
File:205.jpeg|link=205|[[Label Maker (Brother P-touch D610BT) ID:205]]
</gallery>


Mike Hermann
==Measuring and inspection tools==
* Hitachi 200 MHz digital scope
* Weller Adjustable soldering station
* 2 channel 30 VDC bench supply
* Current clamps for multimeter
* Std metal working handtools
* Std wood working handtools
* Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
* Paintgun (compressor driven)
* Rotary saw
* Jigsaw
* 2.5 T rollaway jack
* Metric and Imperial wrench set
* Large torque wrench
* Shop vac
* Dremel and kit
* Bit set (std drivers, allan key, torx, torx secure, etc)
* (more to be added)


Dan VE6IBM
{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}
* PA System
 
* 60 Mhz 3 channel scope
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
* Surface Mount Technology Hot Air Rework Station (with soldering tools)
File:97.jpg|link=97|[[Inspection mirror, 18" gooseneck ID:97]]
* (more to be added)
File:98.jpg|link=98|[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|link=99|[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|link=100|[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|link=101|[[Measuring tapes ID:101]]
File:102.jpg|link=102|[[Rulers ID:102]]
File:103.jpg|link=103|[[Squares ID:103]]
File:104.jpg|link=104|[[Thermometer, infrared (H64) ID:104]]
File:203.jpeg|link=203|[[3D Scanner (Creality RaptorX) ID:203]]
File:188.jpg|[[Thermal camera, white ethernet camera, 320x240 (chinese camera) ID:188]]
</gallery>
 
==Miscellaneous tools==
 
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:Booth-Set-up-01.jpg|link=204|[[Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
File:197.jpeg|link=197|[[Vacuum,_13_gal_1.5_HP_(Shop_Vac_3333.0E)_ID:197]]
File:1152.jpg|link=179|[[Drying rack (coyle-made) ID:179]]
File:199.jpeg|link=199|[[Bicycle pump (Unknown make/model) ID:199]]
File:200.jpeg|link=200|[[Ultrasonic Cleaner (Unknown make/model) ID:200]]
File:202.jpeg|link=202|[[Glass Grinder (Gryphette Diamond Grinder) ID:202]]
File:206.jpeg|link=206|[[Hot Knife (250W AC Rotatable Electric Hot Knife) ID:206]]
</gallery>
 
==Removed equipment==
 
 
In case they are brought back, or, so people who could have sworn we had a tool know it was removed.
 
<gallery style="background: darksalmon" mode="nolines" class="mw-collapsible mw-collapsed">
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>

Latest revision as of 18:19, 17 March 2025

Want to add a new tool? Follow this procedure!

Alternatively, you can use this link to automatically populate a new tool page! https://my.protospace.ca/add-new-tool

We can always use new tools. Your best bet on figuring out if we want something is simply asking on our forum. Please feel free to contact Protospace to arrange a tool donation.

We also have an alphabetically ordered and categorized tool catalog.

3D Printers

Comparisons: our 3D printers

Laser Cutters

Comparisons: our laser cutters

Wood/Plastic CNC's

Automotive tools

Electronics equipment

Metalworking tools

Woodworking and plasticworking tools

Textile, Leather, Vinyl, and Media tools

Measuring and inspection tools

See also: the electronics equipment section on this page for electrical and electronic measurement and test equipment.

Miscellaneous tools

Removed equipment

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

Retrieved from "https://wiki.protospace.ca/index.php?title=Tools_we_have&oldid=7486"