3D Scanner (Creality RaptorX) ID:203

From Protospace Wiki
(Redirected from 203)
Jump to navigation Jump to search

← Back to tools we have

203.jpeg
Type 3D Scanner
Make/Model Creality RaptorX
Serial number BCKP9430157
Original owner Protospace
Loan status Owned by Protospace
Arrival date March 2025
Location TBD/locker, hot potato between instructors for now
Functional status Functional
Usage permissions Members
Certification TBD
Wiki-ID 203
Label 1.0" 1.5" 2.0"


Your Responsibility for Contents and Condition of Tool

Creality RaptorX Protospace, acceptance of responsibility for contents card, front side.png
Case contents
RaptorX scanner, wireless handle, short USB-C/power cable and small metal phone clip
Power adapter, long USB-C/power cable, USB-C cable
Calibration plate -- FRAGILE!
Wireless adapter, USB-C adapter, consumable reflective markers

Specs

34+7 Blue Laser Lines - Efficiency and Details - 34 cross laser lines for scanning medium to large objects quickly at 1,020,000 points/s

7 Laser Lines for Partial HD Scanning - Each laser line is as fine as 0.1mm, capturing sharper edges and richer details. Equipped with a 2.3-megapixel 3D imaging camera, it scans and restores fine details with high accuracy.

Volumetric Accuracy 0.02mm + 0.06mm/m

Laser Line Scanning - Minimum scan size: 5*5*5 mm³, Maximum scan size: 4000*4000*4000 mm³

Laser Line Scanning frame rates of up to 60fps


NIR Structured Light Scanning - Scanning objects ranging from - 150*150*150mm³-2000*2000*2000mm³

NIR frame rates of up to 30fps


Wireless scanning, WiFi6 AX6000, 35.4WH battery (up to 4 hours)

Usage

The software is user-friendly and prompts through required steps.

Creality Scan (Windows/Mac) - https://www.creality.com/pages/download-cr-scan-raptor

Lots of tips and techniques for effective scanning:

https://wiki.creality.com/en/3d-scanner/raptorx/tutorial

https://wiki.creality.com/en/3d-scanner/tutorials

Troubleshooting

Creality 3D Scanner Official Group

https://www.facebook.com/groups/creality3dscanner/

Windows - scanner cameras have wrong drivers / show as ! in Device Manager

Software should prompt to remove certain Windows Updates and reinstall Creality drivers. There's support articles regarding this as well.

It didn't work for me, but I didn't try very hard - fired right up on Mac. Update this section when you make it go on Windows.

Documentation

https://wiki.creality.com/en/3d-scanner/raptorx/manual

Links

https://www.creality.com/products/creality-raptorx-3d-scanner

Documents/photos: https://drive.google.com/drive/folders/1d2queBIim9U8R5j6F-G0RUs2dAonnmGB?usp=drive_link