Tools we have: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(→‎Rapid Prototyping Tools: added link to laser cutters overview article)
 
(228 intermediate revisions by 20 users not shown)
Line 1: Line 1:
[[File:Click_tip.png|right]]
Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!


We can always use new tools. Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.


'''Adding a new tool to the wiki?''' Follow this [[Adding New Tools Procedure|procedure]].
If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wish list]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].
 
We can always use new tools! Please feel free to [[List_of_Links_and_Email_Addresses|contact Protospace]] to donate, arrange for pickup, or drop them off in person.
 
If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools We Want| tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://groups.google.com/forum/#!forum/protospace-discuss discussion group].


We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].
We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].


__TOC__


{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}
==Rapid prototyping tools==


{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}


==Rapid Prototyping Tools==
<gallery mode="nolines" widths="160" heights="160">
:''Comparisons: [[our 3D printers]], [[our laser cutters]]''
File:2.jpg|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
<gallery>
File:159.jpg|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:2.jpg|link=2              |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:170.jpg|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:3.jpg|link=3              |[[3D printer, FFF (PrusaMD) ID:3]]
File:160.jpg|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:4.jpg|link=4              |[[3D printer, FFF, delta (Kossel) ID:4]]
File:Thunder-51-01.jpg|[[Thunder Nova 51 Laser ID:178]]
File:6.jpg|link=6              |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:107.jpg|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:107.jpg|link=107          |[[Laser cutter (Trotec Speedy 300) ID:107]]
File:141.jpg|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>
</gallery>


==Automotive Tools==
==Automotive tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:8.jpg|link=8              |[[Floor jack, blue ID:8]]
File:8.jpg|[[Floor jack, blue ID:8]]
File:9.jpg|link=9              |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|link=11            |[[Socket set ID:11]]
File:11.jpg|[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
</gallery>
</gallery>


==Chemistry==
==Chemistry==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:12.jpg|link=12            |[[Oxygen concentrator (OGSI OG-15) ID:12]]
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>
</gallery>


*Hot Plate/Stirrer (Lab Line/Orange) - James - Private - Working - Ask Owner First
==Electronics equipment==
*Hot Plate/Stirrer (VWR/White) - James - Semi-Permanent Loan - Working, needs new ceramic top - Ask Owner First
 
*Rheostat For Heating Mantle (Green) - James - Private - Working - Ask Owner First
<gallery mode="nolines" widths="160" heights="160">
File:14.jpg|[[Counter (Lafayette 54517) ID:14]]
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:19.jpg|[[Logic analyzer (HP 1631D) ID:19]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:24.jpg|[[Oscilloscope (Tektronix 2465A) ID:24]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
</gallery>


==Electronics Tools==
==Metalworking tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:13.jpg|link=13            |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:14.jpg|link=14            |[[Counter (Lafayette 54517) ID:14]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:15.jpg|link=15            |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:16.jpg|link=16            |[[Function generator (John's) ID:16]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:17.jpg|link=17        |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:18.jpg|link=18            |[[Heat gun (Powerfist) ID:18]]
File:151.jpg|[[Brake, box and pan, 24" (Magnum) ID:151]]
File:19.jpg|link=19            |[[Logic analyzer (HP 1631D) ID:19]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:20.jpg|link=20            |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:45.jpg|[[Foundry, propane ID:45]]
File:21.jpg|link=21            |[[Oscilloscope (Brunelle 2925) ID:21]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:22.jpg|link=22            |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:23.jpg|link=23            |[[Oscilloscope (Tektronix 2225) ID:23]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:24.jpg|link=24            |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:25.jpg|link=25            |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:26.jpg|link=26            |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:27.jpg|link=27            |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:28.jpg|link=28            |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:29.jpg|link=29            |[[Reflow oven (Hamilton Beach) ID:29]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:30.jpg|link=30            |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:54.jpg|[[Vise, giant ID:54]]
File:31.jpg|link=31            |[[Solder fume extractor (Metcal) ID:31]]
File:56.jpg|[[Welding magnets ID:56]]
File:32.jpg|link=32            |[[UV photomasker (Dan's) ID:32]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:33.jpg|link=33            |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:34.jpg|link=34            |[[Waveform monitor (Tektronix 1730) ID:34]]
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
</gallery>
</gallery>


==Metalworking Tools==
==Woodworking and plasticworking tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:35.jpg|link=35            |[[Angle grinder (DeWalt) ID:35]]
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:36.jpg|link=36        |[[Anvil (Chris's) ID:36]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:37.jpg|link=37            |[[Bandsaw, metal, horizontal ID:37]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:38.jpg|link=38            |[[Bench grinder (Baldor) ID:38]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:39.jpg|link=39            |[[Bench grinder (Powerfist) ID:39]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:40.jpg|link=40            |[[Bench grinder (Trademaster PR14210) ID:40]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:41.jpg|link=41            |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:42.jpg|link=42            |[[Drill press (Mastercraft) ID:42]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:NoImage.png|link=44        |[[Forge, propane, pass-through ID:44]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:NoImage.png|link=121      |[[Hydraulic press, 50-ton, electric ID:121]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:45.jpg|link=45            |[[Foundry, propane ID:45]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:46.jpg|link=46            |[[Lathe, metal (Challenger 1660G) ID:46]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:47.jpg|link=47            |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:53.jpg|link=53            |[[Metal shear (Magnum) ID:53]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:48.jpg|link=48            |[[Milling machine (ACRA AM4V) ID:48]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:49.jpg|link=49            |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:51.jpg|link=51            |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:52.jpg|link=52            |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:54.jpg|link=54            |[[Vise, giant ID:54]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:56.jpg|link=56            |[[Welding magnets ID:56]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:109.jpg|link=109          |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:96.jpg|link=96            |[[Spot welder ID:96]]
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:NoImage.png|[[Vise, wood ID:94]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:6" jointer.jpg|6" jointer
File:DeWalt sliding compound miter saw.jpg|12" Dewalt sliding compound miter saw
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:164.jpg|[[Handheld metal detector ID:164]]
File:168.jpg|[[Planer, 16" Auto Planer]]
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:174.jpg|[[drying rack (coyle-made) ID:174]]
</gallery>
</gallery>


==Woodworking and Plasticworking Tools==
==Textile, Vinyl, and Media tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:57.jpg|link=57            |[[Bandsaw, green ID:57]]
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:105.jpg|link=105          |[[Bandsaw (Shop Fox W1706) ID:105]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:58.jpg|link=58            |[[Belt and disc sander (CWD 15-315) ID:58]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:59.jpg|link=59            |[[Clamps ID:59]]
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:60.jpg|link=60            |[[Drill, hand, corded (Black & Decker) ID:60]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:61.jpg|link=61            |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:62.jpg|link=62            |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:63.jpg|link=63            |[[Drill, hand, cordless (Black & Decker) ID:63]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:64.jpg|link=64            |[[Drill, hand, cordless (Black & Decker FireStorm) ID:64]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:65.jpg|link=65            |[[Drill, hand, cordless, with detachable chuck (Black & Decker FireStorm) ID:65]]
File:154.jpg|[[Heat press, digital (Geo Knight & Co, Inc. K20S) ID:154]]
File:66.jpg|link=66            |[[Drill, hand, cordless, with quick connector (Black & Decker FireStorm) ID:66]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:67.jpg|link=67            |[[Drill, hand, cordless (DeWalt) ID:67]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:68.jpg|link=68            |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:69.jpg|link=69            |[[Drill press, 8" (Jobmate) ID:69]]
File:70.jpg|link=70            |[[Jigsaw, corded (Black & Decker) ID:70]]
File:71.jpg|link=71            |[[Jigsaw, cordless (Black & Decker FireStorm) ID:71]]
File:72.jpg|link=72            |[[Jigsaw (Skil) ID:72]]
File:73.jpg|link=73            |[[Jointer, grey ID:73]]
File:74.jpg|link=74            |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:75.jpg|link=75            |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:108.jpg|link=108          |[[Planer (Jet JPM-13CS) ID:108]]
File:76.jpg|link=76            |[[Plate joiner (Porter Cable 557) ID:76]]
File:77.jpg|link=77            |[[Radial arm saw (Craftsman) ID:77]]
File:78.jpg|link=78            |[[Rotary tool, corded (Mastercraft) ID:78]]
File:79.jpg|link=79            |[[Rotary tool, cordless (Dremel) ID:79]]
File:80.jpg|link=80            |[[Router table (Craftsman) ID:80]]
File:NoImage.png|link=Router table (Jeff's)|[[Router table (Jeff's)]]
File:82.jpg|link=82            |[[Sabre saw (Black & Decker FireStorm) ID:82]]
File:83.jpg|link=83            |[[Sander, belt (Makita 9402) ID:83]]
File:84.jpg|link=84            |[[Sander, belt/disc (Dremel 730) ID:84]]
File:85.jpg|link=85            |[[Sander, detail (Ryobi) ID:85]]
File:106.jpg|link=106          |[[Sander, drum (General International 15-250 M1) ID:106]]
File:86.jpg|link=86            |[[Sander, hand, cordless (Black & Decker FireStorm) ID:86]]
File:87.jpg|link=87            |[[Sander, palm (Skil) ID:87]]
File:88.jpg|link=88            |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:89.jpg|link=89            |[[Scroll saw (Dremel) ID:89]]
File:90.jpg|link=90            |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:91.jpg|link=91            |[[Table saw (Craftex CX201) ID:91]]
File:92.jpg|link=92            |[[Thickness planer (Ryobi AP1301) ID:92]]
File:93.jpg|link=93            |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:94.jpg|link=94            |[[Vise, wood ID:94]]
File:95.jpg|link=95            |[[Vise, wood (Travis's) ID:95]]
</gallery>
</gallery>


==Measuring and Inspection Tools==
==Measuring and inspection tools==
See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
 
<gallery>
{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}
File:97.jpg|link=97            |[[Inspection mirror, 18" gooseneck ID:97]]
 
File:98.jpg|link=98            |[[Magnifier lamp, large, with lid ID:98]]
<gallery mode="nolines" widths="160" heights="160">
File:99.jpg|link=99            |[[Magnifier lamp, large, without lid ID:99]]
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:100.jpg|link=100          |[[Magnifier lamp, small, with lid ID:100]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:101.jpg|link=101          |[[Measuring tapes ID:101]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:NoImage.png|link=102      |[[Rulers ID:102]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:NoImage.png|link=103      |[[Squares ID:103]]
File:101.jpg|[[Measuring tapes ID:101]]
File:104.jpg|link=104          |[[Thermometer, infrared (H64) ID:104]]
File:102.jpg|[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
</gallery>
</gallery>


==Miscellaneous Tools==
==Miscellaneous tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160">
File:110.jpg|link=110          |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:111.jpg|link=111           |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:112.jpg|link=112           |[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:113.jpg|link=113          |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:114.jpg|link=114          |[[Bicycle tire jig ID:114]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:115.jpg|link=115           |[[Engraver ID:115]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:116.jpg|link=116           |[[Hand truck, red ID:116]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:Hot-wire foam cutters.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:Hot-wire foam cutters.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:Work light, B&D FireStorm.jpg|link=Lamp, cordless (Black & Decker FireStorm)|[[Lamp, cordless (Black & Decker FireStorm)]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:Oil can, blue.jpg|link=Oil can, blue|[[Oil can, blue]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:Painting tools box.jpg|link=Painting tools|[[Painting tools]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:Pinball, Road Kings.jpg|link=Pinball machine (Williams Road Kings)|[[Pinball machine (Williams Road Kings)]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:Sandblasting cabinet, Powerfist (blue).jpg|link=Sandblasting cabinet, floor, blue (Powerfist)|[[Sandblasting cabinet, floor, blue (Powerfist)]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:Electric screwdriver, B&D.jpg|link=Screwdriver, electric, cordless (Black & Decker)|[[Screwdriver, electric, cordless (Black & Decker)]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:Electric screwdriver, cordless, B&D FireStorm (small).jpg|link=Screwdriver, electric, cordless (Black & Decker FireStorm, small)|[[Screwdriver, electric, cordless (Black & Decker FireStorm, small)]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:Electric screwdriver, B&D FireStorm (with quick connector).jpg|link=Screwdriver, electric, cordless, with quick connector (Black & Decker FireStorm)|[[Screwdriver, electric, cordless, with quick connector (Black & Decker FireStorm)]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:Screwdriver magnetizer and demagnetizer, Wiha 40010.jpg|link=Screwdriver magnetizer/demagnetizer (Wiha 40010)|[[Screwdriver magnetizer/demagnetizer (Wiha 40010)]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:Sewing machine, Singer 1802.jpg|link=120|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:Sewing machine, Relsew.jpg|link=119|[[Sewing machine, industrial (Relsew) ID:119]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:Shop_Vac_Orange.jpg|link=Shop vacuum, orange|[[Shop vacuum, orange]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:Staple gun, Arrow T-18.jpg|link=Staple gun (Arrow T-18)|[[Staple gun (Arrow T-18)]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:Vacuum former with reservoir, oven, and debris.jpg|link=Vacuum cart|[[Vacuum cart]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
File:Portable_vacuum_cleaner.jpg|link=Vacuum cleaner, portable|[[Vacuum cleaner, portable]]
File:Vac_Pump.jpg|link=Vacuum pump|[[Vacuum pump]]
File:Vacuum pump (vacuum former).jpg|link=Vacuum pump (Edwards SpeediVac ED200)|[[Vacuum pump (Edwards SpeediVac ED200)]]
</gallery>
</gallery>


* Vacuum Former (under construction Aug 2017)
==Removed equipment==
 
==Old Equipment Removed==


In case they are brought back, or, so people who could have sworn we had a tool know it was removed.
In case they are brought back, or, so people who could have sworn we had a tool know it was removed.


<gallery>
<gallery style="background: darksalmon" mode="nolines">
File:5.jpg|link=5              |[[3D printer, SLA (mUVe 1) ID:5]]
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP_RapMan.jpg|link=3D printer (3D Systems RapMan)|[[3D printer (3D Systems RapMan)]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg|link=3D printer (Come3D!)|[[3D printer (Come3D!)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP_Cupcake.jpg|link=3D printer (MakerBot Cupcake)|[[3D printer (MakerBot Cupcake)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg|link=1              |[[3D printer, FFF (IIIP) ID:1]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg|link=3D printer, FFF (RepRap)|[[3D printer, FFF (RepRap)]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg|link=3D printer, FFF (Wanhao Duplicator i3)|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg|link=3D printer, MJM (3D Systems InVision si2)|[[3D printer, MJM (3D Systems InVision si2)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:Compressor_Dewalt.jpg|link=Air compressor, 4-gallon (DeWalt)|[[Air compressor, 4-gallon (DeWalt)]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor_Big.jpg|link=Air compressor, 17-gallon|[[Air compressor, 17-gallon]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Reciprocating_compressor.jpg|link=Air compressor, 80-gallon (Ingersoll Rand T30)|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:Angle_Grinder.jpg|link=Angle grinder (Kawasaki)|[[Angle grinder (Kawasaki)]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Anvil_75lb.jpg|link=Anvil|[[Anvil]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Bandsaw_Horizontal.jpg|link=Bandsaw, metal, horizontal (Craftex B013N)|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Horizontal bandsaw, old.jpg|link=Bandsaw, metal, horizontal (Pit Bull)|[[Bandsaw, metal, horizontal (Pit Bull)]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Bending_Brake.jpg|link=Bending brake, 30" (Powerfist)|[[Bending brake, 30" (Powerfist)]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Buffer_Benchtop.jpg|link=Buffer (Clarke 2H 5AB)|[[Buffer (Clarke 2H 5AB)]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Dewars.jpg|link=Dewars, 50-litre|[[Dewars, 50-litre]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:Drill_Dewalt.jpg|link=Drill, corded (DeWalt)|[[Drill, corded (DeWalt)]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Pick_N_Place.jpg|link=Electronics assembly pick and place machine (Multitronics 2000LX)|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:Forge_Propane_2.jpg|link=Forge, propane (Jim's)|[[Forge, propane (Jim's)]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:43.jpg|link=43            |[[Forge (Travis's) ID:43]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Impact_Driver.jpg|link=Impact driver (DeWalt)|[[Impact driver (DeWalt)]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:7.jpg|link=7              |[[Laser cutter, small ID:7]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Lathe, South Bend.jpg|link=Lathe, metal (South Bend)|[[Lathe, metal (South Bend)]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:Lathe, Torrent T.72-42.jpg|link=Lathe, metal (Torrent T.72-42)|[[Lathe, metal (Torrent T.72-42)]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:Lathe_Mill.jpg|link=Lathe–mill combination (Craftex B2229)|[[Lathe–mill combination (Craftex B2229)]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:Lathe_Wood_Mini.jpg|link=Lathe, wood (Haussmann)|[[Lathe, wood (Haussmann)]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:MaxNC10.jpg|link=Milling machine, CNC, mini (MAXNC 10)|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:CNC mill (Terry's).jpg|link=Milling machine, CNC (Terry's)|[[Milling machine, CNC (Terry's)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:DMM, Excel DT9205A.jpg|link=Multimeter, digital (Excel DT9205A)|[[Multimeter, digital (Excel DT9205A)]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:DMM, Powerfist DT 9208.jpg|link=Multimeter, digital (Powerfist DT 9208A)|[[Multimeter, digital (Powerfist DT 9208A)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:Audio mixing board.jpg|link=PA system (Dan Damron's)|[[PA system (Dan Damron's)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:50.jpg|link=50            |[[Oxyacetylene torch, large ID:50]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:Parts washer, Powerfist 3.5 L.jpg|link=Parts washer, 3.5 L (Powerfist)|[[Parts washer, 3.5 L (Powerfist)]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:Plasma cutter, Hypertherm 45.jpg|link=Plasma cutter (Hypertherm 45)|[[Plasma cutter (Hypertherm 45)]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:plasma_cutter.thumbnail.jpg|link=Plasma cutter, CNC (Kyle Paavola's)|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Router_Plunge_Makita.jpg|link=Router, plunge (Makita 3612BR)|[[Router, plunge (Makita 3612BR)]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Plunge router (green).jpg|link=Router, green|[[Router, green]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:10.jpg|link=10            |[[Press (Powerfist) ID:10]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:NoImage.png|link=81        |[[Router table, wooden ID:81]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:Chop_Saw.jpg|link=Saw, compound mitre (Ryobi)|[[Saw, compound mitre (Ryobi)]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:Chopsaw_Metal.jpg|link=Saw, compound mitre, metal (Ryobi)|[[Saw, compound mitre, metal (Ryobi)]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Reciprocating_Saw.jpg|link=Saw, sabre (Mastercraft)|[[Saw, sabre (Mastercraft)]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Skil_Saw_BD.jpg|link=Saw, handheld circular, 7 1/4" (Black & Decker)|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Skil_Saw_Red.jpg|link=Saw, handheld circular (Skil)|[[Saw, handheld circular (Skil)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Shaper, metal.jpg|link=Shaper, 7"|[[Shaper, 7"]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Taps_Grey.jpg|link=Tap & die set (Mastercraft)|[[Tap & die set (Mastercraft)]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:OxyAce_Mini.jpg|link=Torch, oxygen–acetylene, mini|[[Torch, oxygen–acetylene, mini]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:Vice_Medium.jpg|link=Vise, medium (Irwin)|[[Vise, medium (Irwin)]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Welder_MIG.jpg|link=Welder, MIG (Lincoln Weld-Pak 100)|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:55.jpg|link=55            |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>
</gallery>
* 3D Printer (Ultimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??
* Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix
* Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
* Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
* Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members

Latest revision as of 20:06, 20 April 2024

Want to add a new tool? Follow this procedure!

We can always use new tools. Please feel free to contact Protospace to donate, arrange for pickup, or drop them off in person.

If you are interested in knowing what kind of tools we are looking for, we also have a member-managed tool wish list, but your best bet on figuring out if we want something is simply asking on our forum.

We also have an alphabetically ordered and categorized tool catalog.

Rapid prototyping tools

Comparisons: our 3D printers, our laser cutters

Automotive tools

Chemistry

Electronics equipment

Metalworking tools

Woodworking and plasticworking tools

Textile, Vinyl, and Media tools

Measuring and inspection tools

See also: the electronics equipment section on this page for electrical and electronic measurement and test equipment.

Miscellaneous tools

Removed equipment

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

Retrieved from "https://wiki.protospace.ca/index.php?title=Tools_we_have&oldid=6790"