Tools we have: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(added notice at the top about the revamped procedures for adding tools and assigning Wiki ID numbers, and put the other yellow notice in a better place)
 
(135 intermediate revisions by 14 users not shown)
Line 1: Line 1:
{{Warning|Adding a new tool to the wiki? [[Adding New Tools Procedure|The procedure]] has been revamped! Please follow it as closely as you can, and report any problems on its talk page or the forum. [[Protospace Wiki IDs|The procedure for assigning Wiki ID numbers]] has been revamped too; please read it before giving anything a number!}}
Want to '''add a new tool'''? Follow [[Protospace Wiki:Adding new tools|this procedure]]!


We can always use new tools! Please feel free to [[contact information|contact Protospace]] to donate, arrange for pickup, or drop them off in person.
We can always use new tools. Your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum]. Please feel free to [[contact information|contact Protospace]] to arrange a tool donation.  
 
If you are interested in knowing what kind of tools we are looking for, we also have a member-managed [[Tools we want|tool wishlist]], but your best bet on figuring out if we want something is simply asking on our [https://forum.protospace.ca forum].


We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].
We also have [[:Category:Tools|an alphabetically ordered and categorized tool catalog]].


__TOC__
__TOC__
{{Warning|Treat the tools at Protospace with respect! Clean, functioning tools make for a happy crowd.}}


==Rapid prototyping tools==
==Rapid prototyping tools==


:''Comparisons: [[our 3D printers]], [[our laser cutters]]''
{{hatnote|Comparisons: [[our 3D printers]], [[our laser cutters]]}}


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:182.jpg|link=182|[[3D Printer, FFF (Bambu Lab P1S) ID:182]]
File:2.jpg         |link=2           |[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:2.jpg|link=2|[[3D printer, FFF (ORD Bot Hadron) ID:2]]
File:3.jpg         |link=3            |[[3D printer, FFF (PrusaMD) ID:3]]
File:159.jpg|link=159|[[3D printer, resin (Anycubic Photon 5.5) ID:159]]
File:6.jpg         |link=6            |[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:170.jpg|link=170|[[3D_printer, resin (ELEGOO Saturn) ID:170]]
File:107.jpg       |link=107         |[[Laser cutter (Trotec Speedy 300) ID:107]]
File:160.jpg|link=160|[[Curing station (Anycubic Wash and Cure Machine) ID:160]]
File:141.jpg       |link=141         |[[TD 3040 Mini CNC ID:141]]
File:Thunder-51-01.jpg|link=178|[[Thunder Nova 51 Laser ID:178]]
File:Precix-CNC-001.jpg |link=142    |[[Precix-CNC ID:142]]
File:107.jpg|link=107|[[Laser cutter (Trotec Speedy 300) ID:107]]
File:LongMill-on-Shelf-01.png |link=143 |[[LongMill CNC ID:143]]
File:141.jpg|link=141|[[CNC router, mini (TD 3040) ID:141]]
File:Precix-CNC-001.jpg|link=153|[[CNC router, wood (Precix) ID:153]]
File:LongMill-on-Shelf-01.png|link=143|[[CNC router, benchtop (SIENCI LongMill) ID:143]]
</gallery>
</gallery>


==Automotive tools==
==Automotive tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:8.jpg|[[Floor jack, blue ID:8]]
File:8.jpg         |link=8            |[[Floor jack, blue ID:8]]
File:9.jpg|[[Trolley jack and axle stand kit (Certified) ID:9]]
File:9.jpg         |link=9            |[[Trolley jack and axle stand kit (Certified) ID:9]]
File:11.jpg|[[Socket set ID:11]]
File:11.jpg         |link=11          |[[Socket set ID:11]]
File:162.jpeg|link=162|[[Bike stand (Feedback Sport) ID:162]]
File:181.jpeg|link=181|[[Blind hole bearings removal slide hammer ID:181]]
</gallery>
</gallery>


==Chemistry==
==Chemistry==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:12.jpg|[[Oxygen concentrator (OGSI OG-15) ID:12]]
File:12.jpg         |link=12          |[[Oxygen concentrator (OGSI OG-15) ID:12]]
</gallery>
</gallery>


==Electronics equipment==
==Electronics equipment==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:15.jpg|[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:13.jpg        |link=13          |[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:16.jpg|[[Function generator (John's) ID:16]]
File:14.jpg        |link=14          |[[Counter (Lafayette 54517) ID:14]]
File:18.jpg|[[Heat gun (Powerfist) ID:18]]
File:15.jpg         |link=15          |[[Decade box, capacitance (Servomex Controls Decade Capacitor Type B) ID:15]]
File:20.jpg|[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:16.jpg         |link=16          |[[Function generator (John's) ID:16]]
File:167.jpg|[[Oscilloscope (Siglent SDS1104X-E) ID:167]]
File:18.jpg         |link=18          |[[Heat gun (Powerfist) ID:18]]
File:23.jpg|[[Oscilloscope (Tektronix 2225) ID:23]]
File:19.jpg        |link=19          |[[Logic analyzer (HP 1631D) ID:19]]
File:25.jpg|[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:20.jpg         |link=20          |[[Multimeter, digital (Pro.Point 8344665) ID:20]]
File:26.jpg|[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:23.jpg         |link=23          |[[Oscilloscope (Tektronix 2225) ID:23]]
File:27.jpg|[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:24.jpg         |link=24          |[[Oscilloscope (Tektronix 2465A) ID:24]]
File:28.jpg|[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:25.jpg         |link=25          |[[Oscilloscope, PC (Syscomp DSO-101) ID:25]]
File:30.jpg|[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:26.jpg         |link=26          |[[Power supply, bench (GQ Electronics GQ-A305D) ID:26]]
File:31.jpg|[[Solder fume extractor (Metcal) ID:31]]
File:27.jpg         |link=27          |[[Power supply, bench, 500 V (Heathkit PS-3) ID:27]]
File:33.jpg|[[Waveform generator (Syscomp WGM-101) ID:33]]
File:28.jpg         |link=28          |[[Power supply, bench, 2-channel (TENMA 72-7245) ID:28]]
File:34.jpg|[[Waveform monitor (Tektronix 1730) ID:34]]
File:30.jpg         |link=30          |[[Hot-air rework station (GQ Electronics 5200) ID:30]]
File:145-Welcome-Monitor.png|[[Welcome Room Monitor ID:145]]
File:31.jpg         |link=31          |[[Solder fume extractor (Metcal) ID:31]]
File:33.jpg         |link=33          |[[Waveform generator (Syscomp WGM-101) ID:33]]
File:34.jpg         |link=34          |[[Waveform monitor (Tektronix 1730) ID:34]]
</gallery>
</gallery>


==Metalworking tools==
==Metalworking tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:35.jpg|[[Angle grinder (DeWalt) ID:35]]
File:35.jpg         |link=35          |[[Angle grinder (DeWalt) ID:35]]
File:37.jpg|[[Bandsaw, metal, horizontal ID:37]]
File:37.jpg         |link=37          |[[Bandsaw, metal, horizontal ID:37]]
File:165.jpg|[[Bandsaw, metal, horizontal (Westward UE-712) ID:165]]
File:39.jpg         |link=39          |[[Bench grinder (Powerfist) ID:39]]
File:39.jpg|[[Bench grinder (Powerfist) ID:39]]
File:40.jpg         |link=40          |[[Bench grinder (Trademaster PR14210) ID:40]]
File:40.jpg|[[Bench grinder (Trademaster PR14210) ID:40]]
File:41.jpg         |link=41          |[[Brake, box and pan, 24" (Magnum) ID:41]]
File:42.jpg|[[Drill press (Mastercraft) ID:42]]
File:142.jpg        |link=142          |[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:45.jpg|[[Foundry, propane ID:45]]
File:42.jpg         |link=42          |[[Drill press (Mastercraft) ID:42]]
File:121.jpg|[[Hydraulic press, 50-ton, electric ID:121]]
File:45.jpg         |link=45          |[[Foundry, propane ID:45]]
File:46.jpg|[[Lathe, metal (Challenger 1660G) ID:46]]
File:121.jpg       |link=121          |[[Hydraulic press, 50-ton, electric ID:121]]
File:47.jpg|[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:46.jpg         |link=46          |[[Lathe, metal (Challenger 1660G) ID:46]]
File:53.jpg|[[Metal shear (Magnum) ID:53]]
File:47.jpg         |link=47          |[[Lathe, miniature (Taig Microlathe II) ID:47]]
File:48.jpg|[[Milling machine (ACRA AM4V) ID:48]]
File:53.jpg         |link=53          |[[Metal shear (Magnum) ID:53]]
File:49.jpg|[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:48.jpg         |link=48          |[[Milling machine (ACRA AM4V) ID:48]]
File:173.png|[[Plasma Cutter (Hypertherm, Powermax85) ID:173]]
File:49.jpg         |link=49          |[[Milling machine, CNC (Tormach PCNC 1100) ID:49]]
File:51.jpg|[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:51.jpg         |link=51          |[[Plasma cutter, huge (Powercut 1500) ID:51]]
File:52.jpg|[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:52.jpg         |link=52          |[[Plasma cutter, small (Miller Spectrum 375) ID:52]]
File:54.jpg|[[Vise, giant ID:54]]
File:54.jpg         |link=54          |[[Vise, giant ID:54]]
File:56.jpg|[[Welding magnets ID:56]]
File:56.jpg         |link=56          |[[Welding magnets ID:56]]
File:Metalworking pattern maker's vise.jpg|[[Metalworking pattern maker's vise]]
File:145.jpg                           |Metalworking pattern maker's vise
File:Metal drill press.jpg|[[HD gear driven drill press/mill]]
File:.jpg                           |HD gear driven drill press/mill
File:163.jpg|[[Pipe bender (Power Fist 12 ton hydraulic) ID:163]]
File:180.jpg|link=180|[[Metal Shear Brake Roll - (New Magnum 52) ID:180]]
File:187.png|link=187|[[Welder, TIG, Everlast PowerTIG 250EX ID:187]]
</gallery>
</gallery>


==Woodworking and plasticworking tools==
==Woodworking and plasticworking tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:171-Wood-Lathe-Jet.jpg|[[Wood Lathe, JET JWL-1236 ID:171]]
File:57.jpg       |link=57            |[[Bandsaw, green ID:57]]
File:57.jpg|[[Bandsaw, green ID:57]]
File:59.jpg       |link=59            |[[Clamps ID:59]]
File:61.jpg|[[Drill, hand, corded, black (Jobmate) ID:61]]
File:61.jpg       |link=61            |[[Drill, hand, corded, black (Jobmate) ID:61]]
File:62.jpg|[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:62.jpg       |link=62            |[[Drill, hand, corded, dark blue (Ryobi) ID:62]]
File:68.jpg|[[Drill, hand, corded (Makita DP3720) ID:68]]
File:67.jpg        |link=67            |[[Drill, hand, cordless (DeWalt) ID:67]]
File:69.jpg|[[Drill press, 8" (Jobmate) ID:69]]
File:68.jpg       |link=68            |[[Drill, hand, corded (Makita DP3720) ID:68]]
File:70.jpg|[[Jigsaw, corded (Black & Decker) ID:70]]
File:69.jpg       |link=69            |[[Drill press, 8" (Jobmate) ID:69]]
File:72.jpg|[[Jigsaw (Skil) ID:72]]
File:70.jpg       |link=70            |[[Jigsaw, corded (Black & Decker) ID:70]]
File:75.jpg|[[Nailer, pneumatic, 2-in-1 ID:75]]
File:72.jpg       |link=72            |[[Jigsaw (Skil) ID:72]]
File:76.jpg|[[Plate joiner (Porter Cable 557) ID:76]]
File:74.jpg        |link=74            |[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:140.jpg|[[Pocket hole jig (Kreg K3) ID:140]]
File:75.jpg       |link=75            |[[Nailer, pneumatic, 2-in-1 ID:75]]
File:78.jpg|[[Rotary tool, corded (Mastercraft) ID:78]]
File:108.jpg      |link=108          |[[Planer (Jet JPM-13CS) ID:108]]
File:79.jpg|[[Rotary tool, cordless (Dremel) ID:79]]
File:76.jpg       |link=76            |[[Plate joiner (Porter Cable 557) ID:76]]
File:124.jpg|[[Router table (Jeff's) ID:124]]
File:140.jpg       |link=140          |[[Pocket hole jig (Kreg K3) ID:140]]
File:83.jpg|[[Sander, belt (Makita 9402) ID:83]]
File:78.jpg       |link=78            |[[Rotary tool, corded (Mastercraft) ID:78]]
File:85.jpg|[[Sander, detail (Ryobi) ID:85]]
File:79.jpg       |link=79            |[[Rotary tool, cordless (Dremel) ID:79]]
File:106.jpg|[[Sander, drum (General International 15-250 M1) ID:106]]
File:124.jpg       |link=124          |[[Router table (Jeff's) ID:124]]
File:138.jpg|[[Sander, random orbital (Ridgid R2601) ID:138]]
File:83.jpg       |link=83            |[[Sander, belt (Makita 9402) ID:83]]
File:139.jpg|[[Sander, random orbital (Ridgid R2601) ID:139]]
File:84.jpg        |link=84            |[[Sander, belt/disc (Dremel 730) ID:84]]
File:88.jpg|[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:85.jpg       |link=85            |[[Sander, detail (Ryobi) ID:85]]
File:89.jpg|[[Scroll saw (Dremel) ID:89]]
File:106.jpg       |link=106          |[[Sander, drum (General International 15-250 M1) ID:106]]
File:92.jpg|[[Thickness planer (Ryobi AP1301) ID:92]]
File:138.jpg       |link=138          |[[138|Sander, random orbital (Ridgid R2601) ID:138]]
File:93.jpg|[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:139.jpg       |link=139          |[[139|Sander, random orbital (Ridgid R2601) ID:139]]
File:NoImage.png|[[Vise, wood ID:94]]
File:88.jpg       |link=88            |[[Sander, straight-line/orbital (Black & Decker Deluxe) ID:88]]
File:95.jpg|[[Vise, wood (Travis's) ID:95]]
File:89.jpg       |link=89            |[[Scroll saw (Dremel) ID:89]]
File:Makita cordless jigsaw.jpg|cordless Makita jig saw
File:91.jpg        |link=91            |[[Table saw (Craftex CX201) ID:91]]
File:Ridgid random orbital sander (1 of 2, unknown which one).jpg|Ridgid random orbital sander (2 of these)
File:92.jpg       |link=92            |[[Thickness planer (Ryobi AP1301) ID:92]]
File:6" jointer.jpg|[[Jointer, 6-Inch ID:185]]
File:93.jpg       |link=93            |[[Vacuum, sawdust (Craftex CX404) ID:93]]
File:DeWalt sliding compound miter saw.jpg|[[Miter saw, compound, sliding (DeWalt) ID:186]]
File:94.jpg        |link=94            |[[Vise, wood ID:94]]
File:Wood tools sharpening station.jpg|A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:95.jpg       |link=95            |[[Vise, wood (Travis's) ID:95]]
File:149.jpg|[[Drill press, floor mounted, variable speed ID:149]]
File:142.jpg                           |cordless Makita jig saw
File:164.jpg|[[Handheld metal detector ID:164]]
File:143.jpg                           |Ryobi random orbital sander
File:168.jpg|[[Planer, 16" Auto Planer]]
File:146.jpg                           |6" jointer
File:172.jpg|[[Table saw (SawStop) ID:172]]
File:147.jpg                           |12" Dewalt sliding compound miter saw
File:174.jpg|[[drying rack (coyle-made) ID:174]]
File:148.jpg                           |A sharpening station with a plethora of tool sharpening grinders-jigs-etc
File:149.jpg                           |17 speed floor mounted drill press
</gallery>
</gallery>


==Textile and Vinyl tools==
==Textile, Leather, Vinyl, and Media tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:120.jpg|[[Sewing machine, domestic (Singer 1802) ID:120]]
File:151.jpg       |link=151          |[[Big Vinyl Cutter ID:151]]
File:183.png|[[Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183]]
File:152.jpg       |link=152          |[[Direct to Garment Printer ID:152]]
File:184.jpg|[[Skiving Machine, Bell Knife, (Techsew SK-4) ID:184]]
File:153.jpg       |link=153          |[[Silhouette Cameo Vinyl Cutter ID:153]]
File:Singer 211G155.jpg|[[Sewing machine, industrial (Singer 211G155) ID:147]]
File:120.jpg       |link=120          |[[Sewing machine, domestic (Singer 1802) ID:120]]
File:144.jpg|[[Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144]]
File:Singer 211G155.jpg               |Sewing machine, industrial (Singer 211G155)
File:150.jpg|[[Sewing/embroidery machine, computer controlled (Singer Futura CE-250) ID:150]]
File:144.jpg       |link=144          |[[Tajima Embroidery Machine ID:144]]
File:156.jpg|[[Sewing machine, domestic (Janome HD-1000) ID:156]]
File:157.jpg|[[Serger, 4 thread (Singer 14U34B) ID:157]]
File:158.jpg|[[Serger, 4 thread, (Janome MyLock 634D) ID:158]]
File:148.jpg|[[Vinyl cutter, big (Graphtec FC8000-75) ID:148]]
File:NoImage.png|Vinyl cutter, small (Silhouette Cameo), on loan from Jamie Frost
File:154.jpg|[[Heat press, digital (Geo Knight and Co Inc K20S) ID:154]]
File:155.jpg|[[Heat press, auto release (Insta Graphic Systems 158) ID:155]]
File:166.jpg|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
</gallery>
</gallery>


==Measuring and inspection tools==
==Measuring and inspection tools==


See also the [[#Electronics Tools|Electronics Tools section on this page]] for electrical and electronic measurement and test equipment.
{{hatnote|See also: the [[#Electronics equipment|electronics equipment section on this page]] for electrical and electronic measurement and test equipment.}}


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:97.jpg|[[Inspection mirror, 18" gooseneck ID:97]]
File:97.jpg         |link=97          |[[Inspection mirror, 18" gooseneck ID:97]]
File:98.jpg|[[Magnifier lamp, large, with lid ID:98]]
File:98.jpg         |link=98          |[[Magnifier lamp, large, with lid ID:98]]
File:99.jpg|[[Magnifier lamp, large, without lid ID:99]]
File:99.jpg         |link=99          |[[Magnifier lamp, large, without lid ID:99]]
File:100.jpg|[[Magnifier lamp, small, with lid ID:100]]
File:100.jpg       |link=100          |[[Magnifier lamp, small, with lid ID:100]]
File:101.jpg|[[Measuring tapes ID:101]]
File:101.jpg       |link=101          |[[Measuring tapes ID:101]]
File:102.jpg|[[Rulers ID:102]]
File:102.jpg       |link=102          |[[Rulers ID:102]]
File:103.jpg|[[Squares ID:103]]
File:103.jpg       |link=103          |[[Squares ID:103]]
File:104.jpg|[[Thermometer, infrared (H64) ID:104]]
File:104.jpg       |link=104          |[[Thermometer, infrared (H64) ID:104]]
</gallery>
</gallery>


==Miscellaneous tools==
==Miscellaneous tools==


<gallery>
<gallery mode="nolines" widths="160" heights="160" class="mw-collapsible">
<!-- Image          Image Link (ID)    Text Link (usual link format) -->
File:111.jpg|link=111|[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:111.jpg       |link=111         |[[Air compressor, 80-gallon (MAXair Premium) ID:111]]
File:112.jpg|link=112|[[Air compressor, silent ID:112]]
File:112.jpg       |link=112         |[[Air compressor, silent ID:112]]
File:115.jpg|link=115|[[Engraver ID:115]]
File:115.jpg       |link=115         |[[Engraver ID:115]]
File:116.jpg|link=116|[[Hand truck, red ID:116]]
File:116.jpg       |link=116         |[[Hand truck, red ID:116]]
File:117.jpg|link=117|[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:117.jpg       |link=117         |[[Hot-wire foam cutter, handheld, 4.5"×5.5" (Woodland Scenics) ID:117]]
File:118.jpg|link=118|[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:118.jpg       |link=118         |[[Hot-wire foam cutter, tabletop, 14"×12" ID:118]]
File:127.jpg|link=127|[[Oil can, blue ID:127]]
File:127.jpg       |link=127         |[[Oil can, blue ID:127]]
File:128.jpg|link=128|[[Painting tools ID:128]]
File:128.jpg       |link=128         |[[Painting tools ID:128]]
File:129.jpg|link=129|[[Pinball machine (Williams Road Kings) ID:129]]
File:129.jpg       |link=129         |[[Pinball machine (Williams Road Kings) ID:129]]
File:130.jpg|link=130|[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:130.jpg       |link=130         |[[Sandblasting cabinet, floor, blue (Powerfist) ID:130]]
File:131.jpg|link=131|[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:131.jpg       |link=131         |[[Screwdriver magnetizer/demagnetizer (Wiha 40010) ID:131]]
File:132.jpg|link=132|[[Shop vacuum, orange ID:132]]
File:132.jpg       |link=132         |[[Shop vacuum, orange ID:132]]
File:133.jpg|link=133|[[Staple gun (Arrow T-18) ID:133]]
File:133.jpg       |link=133         |[[Staple gun (Arrow T-18) ID:133]]
File:122.jpg|link=122|[[Tile work surfaces ID:122]]
File:122.jpg       |link=122         |[[Tile work surfaces ID:122]]
File:123.jpg|link=123|[[Tile work surfaces ID:123]]
File:123.jpg       |link=123         |[[Tile work surfaces ID:123]]
File:134.jpg|link=134|[[Vacuum cart ID:134]]
File:134.jpg       |link=134         |[[Vacuum cart ID:134]]
File:136.jpg|link=136|[[Vacuum cleaner, portable ID:136]]
File:136.jpg       |link=136         |[[Vacuum cleaner, portable ID:136]]
File:137.jpg|link=137|[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:137.jpg       |link=137         |[[Vacuum pump (Edwards SpeediVac ED200) ID:137]]
File:161.jpg|link=161|[[Laminator (Scotch TL902) ID:161]]
File:166.jpg|link=166|[[Printer, 44" Large Format (HP DesignJet T1200), ID:166]]
File:169.png|link=169|[[ADS-B Base Station, FlightAware, ID:169]]
File:176.jpg|link=176|[[Vending machine, pop (Vendo 576) ID:176]]
File:177.jpg|link=177|[[Vending machine, snacks (Crane 173) ID:177]]
</gallery>
</gallery>


==Removed equipment==
==Removed equipment==


In case they are brought back, or, so people who could have sworn we had a tool know it was removed.
In case they are brought back, or, so people who could have sworn we had a tool know it was removed.


<gallery>
<gallery style="background: darksalmon" mode="nolines" class="mw-collapsible mw-collapsed">
<!-- A wide screen is recommended for editing this section in source code mode -->
File:91.jpg|[[Table saw (Craftex CX201) ID:91]]
<!-- Image                                Image Link (ID)                              Text Link (usual link format) -->
File:6.jpg|[[Laser cutter, large (Rabbit Laser RL-80-1290) ID:6]]
File:3DP RapMan.jpg                       |link=[[3D printer (3D Systems RapMan)]]     |[[3D printer (3D Systems RapMan)]]
File:3DP RapMan.jpg|[[3D printer (3D Systems RapMan)]]
File:3D printer, Come3D!.jpg             |link=[[3D printer (Come3D!)]]               |[[3D printer (Come3D!)]]
File:3D printer, Come3D!.jpg|[[3D printer (Come3D!)]]
File:3DP Cupcake.jpg                     |link=[[3D printer (MakerBot Cupcake)]]      |[[3D printer (MakerBot Cupcake)]]
File:3DP Cupcake.jpg|[[3D printer (MakerBot Cupcake)]]
File:1.jpg                               |link=1                                      |[[3D printer, FFF (IIIP) ID:1]]
File:1.jpg|[[3D printer, FFF (IIIP) ID:1]]
File:3D printer, Nathan Ward's RepRap.jpg |link=[[3D printer, FFF (RepRap)]]            |[[3D printer, FFF (RepRap)]]
File:3D printer, Nathan Ward's RepRap.jpg|[[3D printer, FFF (RepRap)]]
File:3D printer, Yin's Wanhao.jpg         |link=[[3D printer, FFF (Wanhao Duplicator i3)]]  |[[3D printer, FFF (Wanhao Duplicator i3)]]
File:3D printer, Yin's Wanhao.jpg|[[3D printer, FFF (Wanhao Duplicator i3)]]
File:InVision si2.jpg                     |link=[[3D printer, MJM (3D Systems InVision si2)]]  |[[3D printer, MJM (3D Systems InVision si2)]]
File:InVision si2.jpg|[[3D printer, MJM (3D Systems InVision si2)]]
File:NoImage.png                         |link=5                                      |[[3D printer, SLA (mUVe 1) ID:5]]
File:NoImage.png|[[3D printer, SLA (mUVe 1) ID:5]]
File:Compressor Dewalt.jpg               |link=[[Air compressor, 4-gallon (DeWalt)]]   |[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Dewalt.jpg|[[Air compressor, 4-gallon (DeWalt)]]
File:Compressor Big.jpg                   |link=[[Air compressor, 17-gallon]]           |[[Air compressor, 17-gallon]]
File:Compressor Big.jpg|[[Air compressor, 17-gallon]]
File:110.jpg                             |link=110                                    |[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:110.jpg|[[Air compressor, 60-gallon (Campbell Hausfeld) ID:110]]
File:Reciprocating compressor.jpg         |link=[[Air compressor, 80-gallon (Ingersoll Rand T30)]] |[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:Reciprocating compressor.jpg|[[Air compressor, 80-gallon (Ingersoll Rand T30)]]
File:113.jpg                             |link=113                                    |[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:113.jpg|[[Air pump, foot-operated (Bell FootPumper) ID:113]]
File:Angle Grinder.jpg                   |link=[[Angle grinder (Kawasaki)]]           |[[Angle grinder (Kawasaki)]]
File:Angle Grinder.jpg|[[Angle grinder (Kawasaki)]]
File:Anvil 75lb.jpg                       |link=[[Anvil]]                               |[[Anvil]]
File:Anvil 75lb.jpg|[[Anvil]]
File:Bandsaw Horizontal.jpg               |link=[[Bandsaw, metal, horizontal (Craftex B013N)]] |[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bandsaw Horizontal.jpg|[[Bandsaw, metal, horizontal (Craftex B013N)]]
File:Bending Brake.jpg                   |link=[[Bending brake, 30" (Powerfist)]]      |[[Bending brake, 30" (Powerfist)]]
File:Bending Brake.jpg|[[Bending brake, 30" (Powerfist)]]
File:114.jpg                             |link=114                                    |[[Bicycle tire jig ID:114]]
File:114.jpg|[[Bicycle tire jig ID:114]]
File:Buffer Benchtop.jpg                  |link=[[Buffer (Clarke 2H 5AB)]]             |[[Buffer (Clarke 2H 5AB)]]
File:Buffer Benchtop.jpg|[[Buffer (Clarke 2H 5AB)]]
File:Dewars.jpg                           |link=[[Dewars, 50-litre]]                    |[[Dewars, 50-litre]]
File:13.jpg|[[Counter (Fluke 1910A Multi-Counter) ID:13]]
File:Drill Dewalt.jpg                     |link=[[Drill, corded (DeWalt)]]             |[[Drill, corded (DeWalt)]]
File:Dewars.jpg|[[Dewars, 50-litre]]
File:Pick N Place.jpg                     |link=[[Electronics assembly pick and place machine (Multitronics 2000LX)]] |[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:Drill Dewalt.jpg|[[Drill, corded (DeWalt)]]
File:Forge Propane 2.jpg                 |link=[[Forge, propane (Jim's)]] |[[Forge, propane (Jim's)]]
File:Pick N Place.jpg|[[Electronics assembly pick and place machine (Multitronics 2000LX)]]
File:43.jpg                               |link=43                                      |[[Forge (Travis's) ID:43]]
File:Forge Propane 2.jpg|[[Forge, propane (Jim's)]]
File:NoImage.png                          |link=44                                      |[[Forge, propane, pass-through ID:44]]
File:43.jpg|[[Forge (Travis's) ID:43]]
File:17.jpg                               |link=17                                      |[[Function generator (Krohn–Hite 5100A) ID:17]]
File:NoImage.png|[[Forge, propane, pass-through ID:44]]
File:Impact Driver.jpg                   |link=[[Impact driver (DeWalt)]]             |[[Impact driver (DeWalt)]]
File:17.jpg|[[Function generator (Krohn–Hite 5100A) ID:17]]
File:7.jpg                               |link=7                                      |[[Laser cutter, small ID:7]]
File:Impact Driver.jpg|[[Impact driver (DeWalt)]]
File:Lathe, Torrent T.72-42.jpg          |link=[[Lathe, metal (Torrent T.72-42)]]      |[[Lathe, metal (Torrent T.72-42)]]
File:7.jpg|[[Laser cutter, small ID:7]]
File:Lathe Mill.jpg                       |link=[[Lathe–mill combination (Craftex B2229)]]  |[[Lathe–mill combination (Craftex B2229)]]
File:Lathe, Torrent T.72-42.jpg|[[Lathe, metal (Torrent T.72-42)]]
File:Lathe Wood Mini.jpg                 |link=[[Lathe, wood (Haussmann)]]             |[[Lathe, wood (Haussmann)]]
File:Lathe Mill.jpg|[[Lathe–mill combination (Craftex B2229)]]
File:MaxNC10.jpg                         |link=[[Milling machine, CNC, mini (MAXNC 10)]] |[[Milling machine, CNC, mini (MAXNC 10)]]
File:Lathe Wood Mini.jpg|[[Lathe, wood (Haussmann)]]
File:Audio mixing board.jpg               |link=[[PA system (Dan Damron's)]]           |[[PA system (Dan Damron's)]]
File:MaxNC10.jpg|[[Milling machine, CNC, mini (MAXNC 10)]]
File:22.jpg                               |link=22                                      |[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:Audio mixing board.jpg|[[PA system (Dan Damron's)]]
File:50.jpg                               |link=50                                      |[[Oxyacetylene torch, large ID:50]]
File:22.jpg|[[Oscilloscope (Kikusui COS 5060) ID:22]]
File:Parts washer, Powerfist 3.5 L.jpg   |link=[[Parts washer, 3.5 L (Powerfist)]]     |[[Parts washer, 3.5 L (Powerfist)]]
File:50.jpg|[[Oxyacetylene torch, large ID:50]]
File:Plasma cutter.thumbnail.jpg         |link=[[Plasma cutter, CNC (Kyle Paavola's)]] |[[Plasma cutter, CNC (Kyle Paavola's)]]
File:Parts washer, Powerfist 3.5 L.jpg|[[Parts washer, 3.5 L (Powerfist)]]
File:Router Plunge Makita.jpg             |link=[[Router, plunge (Makita 3612BR)]]     |[[Router, plunge (Makita 3612BR)]]
File:Plasma cutter.thumbnail.jpg|[[Plasma cutter, CNC (Kyle Paavola's)]]
File:10.jpg                               |link=10                                      |[[Press (Powerfist) ID:10]]
File:Router Plunge Makita.jpg|[[Router, plunge (Makita 3612BR)]]
File:NoImage.png                          |link=81                                      |[[Router table, wooden ID:81]]
File:10.jpg|[[Press (Powerfist) ID:10]]
File:87.jpg                               |link=87                                      |[[87|Sander, random orbital (Skil 7492) ID:87]]
File:NoImage.png|[[Router table, wooden ID:81]]
File:Chop Saw.jpg                         |link=[[Saw, compound mitre (Ryobi)]]        |[[Saw, compound mitre (Ryobi)]]
File:87.jpg|[[87|Sander, random orbital (Skil 7492) ID:87]]
File:Chopsaw Metal.jpg                    |link=[[Saw, compound mitre, metal (Ryobi)]]  |[[Saw, compound mitre, metal (Ryobi)]]
File:Chop Saw.jpg|[[Saw, compound mitre (Ryobi)]]
File:Reciprocating Saw.jpg                |link=[[Saw, sabre (Mastercraft)]]            |[[Saw, sabre (Mastercraft)]]
File:Chopsaw Metal.jpg|[[Saw, compound mitre, metal (Ryobi)]]
File:Skil Saw BD.jpg                      |link=[[Saw, handheld circular, 7 1/4" (Black & Decker)]]  |[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:Reciprocating Saw.jpg|[[Saw, sabre (Mastercraft)]]
File:Skil Saw Red.jpg                    |link=[[Saw, handheld circular (Skil)]]      |[[Saw, handheld circular (Skil)]]
File:Skil Saw BD.jpg|[[Saw, handheld circular, 7 1/4" (Black & Decker)]]
File:90.jpg                              |link=90                                      |[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:Skil Saw Red.jpg|[[Saw, handheld circular (Skil)]]
File:119.jpg                              |link=119                                    |[[Sewing machine, industrial (Relsew) ID:119]]
File:90.jpg|[[Scroll saw (Mastercraft 55-6714-6) ID:90]]
File:Shaper, metal.jpg                    |link=[[Shaper, 7"]]                          |[[Shaper, 7"]]
File:119.jpg|[[Sewing machine, industrial (Relsew) ID:119]]
File:Taps Grey.jpg                        |link=[[Tap & die set (Mastercraft)]]        |[[Tap & die set (Mastercraft)]]
File:Shaper, metal.jpg|[[Shaper, 7"]]
File:OxyAce Mini.jpg                      |link=[[Torch, oxygen–acetylene, mini]]      |[[Torch, oxygen–acetylene, mini]]
File:Taps Grey.jpg|[[Tap & die set (Mastercraft)]]
File:32.jpg                              |link=32                                      |[[UV photomasker (Dan's) ID:32]]
File:OxyAce Mini.jpg|[[Torch, oxygen–acetylene, mini]]
File:135.jpg                              |link=135                                    |[[Vacuum pump ID:135]]
File:32.jpg|[[UV photomasker (Dan's) ID:32]]
File:Vice Medium.jpg                      |link=[[Vise, medium (Irwin)]]                |[[Vise, medium (Irwin)]]
File:135.jpg|[[Vacuum pump ID:135]]
File:Welder MIG.jpg                      |link=[[Welder, MIG (Lincoln Weld-Pak 100)]]  |[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:Vice Medium.jpg|[[Vise, medium (Irwin)]]
File:55.jpg                              |link=55                                      |[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:Welder MIG.jpg|[[Welder, MIG (Lincoln Weld-Pak 100)]]
File:109.jpg                             |link=109                                    |[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:55.jpg|[[Welder, stick, orange (Acklands 225 AC Sizzler) ID:55]]
File:109.jpg|[[Welder, Stick, AC/DC (Miller Thunderbolt XL) ID:109]]
File:74.jpg|[[Miter saw, compound, sliding (Hitachi) ID:74]]
File:142.jpg|[[Brake, shear, roller, 52" (Magnum) ID:142]]
File:146.jpg|[[Garment graphic printer, direct inject (Brother GT-361) ID:146]]
</gallery>
</gallery>

Latest revision as of 17:01, 4 October 2024

Want to add a new tool? Follow this procedure!

We can always use new tools. Your best bet on figuring out if we want something is simply asking on our forum. Please feel free to contact Protospace to arrange a tool donation.

We also have an alphabetically ordered and categorized tool catalog.

Rapid prototyping tools

Comparisons: our 3D printers, our laser cutters

Automotive tools

Chemistry

Electronics equipment

Metalworking tools

Woodworking and plasticworking tools

Textile, Leather, Vinyl, and Media tools

Measuring and inspection tools

See also: the electronics equipment section on this page for electrical and electronic measurement and test equipment.

Miscellaneous tools

Removed equipment

In case they are brought back, or, so people who could have sworn we had a tool know it was removed.

Retrieved from "https://wiki.protospace.ca/index.php?title=Tools_we_have&oldid=6997"