Lathe, metal (Challenger 1660G) ID:46: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(added Tooling)
(→‎Tooling: re-create Mark's table)
Line 53: Line 53:
*Safety foot brake
*Safety foot brake


== Tooling ==
==Tooling==
These are the tools for the -ing of the spin.
{| class="wikitable mw-collapsible mw-collapsed"
|+
!Short Description
!Shank Size
!Typical Insert Types
!Long Description
!Photo
!Manuf Code
!ANSI
!ISO
!Replacement Screw Type
!Manufacturer
!New Price
!Notes
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|}


==Documents==
==Documents==

Revision as of 22:18, 20 November 2022

← Back to tools we have

46.jpg
Type Metal lathe
Make/Model Challenger 1660G (a.k.a. Birmingham LUX 1660G and YCL-1660)
Serial number ??
Original owner Protospace
Loan status Owned by Protospace
Arrival date 2015-12-22
Location Metal shop
Functional status Needs Work: needs to be cleaned and set up
Usage permissions Open to full members
Certification Certification Required: lathe training or (upcoming as of 2015-12) lathe/mill training
Wiki-ID 46
Label 1.0" 1.5" 2.0"

Specifications

All from the 1640T/1660T page listed in the Documents section unless noted.

  • Dimensions: 29" deep × 72" long × ?? tall (according to John W)
  • Mass: ~4000–5000 lbs
  • Motor: 7.5 hp, 3-phase, 220 V
  • 36–1800 RPM spindle speed in 12 steps
  • Capacities
    • Swing over bed: 16"
    • Swing over cross slide: 10"
    • Distance between centers: 60"
    • Swing in gap: 60"
    • Width of bed: 24"
  • Headstock
    • Spindle nose: ASA D1-6
    • Spindle bore: 2 1/16" or 2 1/8"
    • Spindle taper: MT 6
    • Spindle speeds: 36, 60, 82, 93, 158, 215, 302, 510, 695, 786, 1328, 1800 rpm
  • Threads & feeds
    • Imperial threading: 2–72 TPI (45 kinds)
    • Metric threading: 0.2–14mm (40 kinds)
    • Module pitch threading: 0.3–3.5 M.P. (18 kinds) (for making shafts for worm gears)
    • DP threading: 8–44 DP (21 kinds)
    • Longitudinal feed range: 0.002"–0.04" ipr
    • Cross feed range: 0.001"–0.02" ipr
  • Carriage
    • Cross slide travel: 8 1/4"
    • Compound slide travel: 5 1/4"
  • Tailstock
    • Center taper: MT 4
    • Quill travel: 6 1/4"
    • Quill diameter: 2 1/16"
  • Coolant pump
  • Safety foot brake

Tooling

Short Description Shank Size Typical Insert Types Long Description Photo Manuf Code ANSI ISO Replacement Screw Type Manufacturer New Price Notes

Documents

History

This lathe was bought by Protospace using funding approved for the purchase of new machine tools at the December 2015 members' meeting. It was picked up and brought to Protospace on 2015-12-22 along with the ACRA mill and the new 80-gallon air compressor. It replaces Kyle Paavola's lathe; it has equivalent capability. It came with the following accessories:

  • 3-jaw chuck
  • 4-jaw chuck
  • Big steady rest
  • Taper attachment
  • 40-position tool post and one tool holder with a carbide tool holder in it
  • Live center
  • A carriage stop with a micrometer
  • Coolant pump
Retrieved from "https://wiki.protospace.ca/index.php?title=Lathe,_metal_(Challenger_1660G)_ID:46&oldid=6208"