Table saw (SawStop) ID:172: Difference between revisions

Jump to navigation Jump to search

Table saw (SawStop) ID:172 (view source)

Revision as of 01:10, 12 August 2025

282 bytes added ,  12 August
Added a warning regarding using Dado blade stack with the standard cartridge. Also mentioned the location of the Dado cartridge.
(Added comment about laser engraved)
(Added a warning regarding using Dado blade stack with the standard cartridge. Also mentioned the location of the Dado cartridge.)
 
Line 88: Line 88:
*If the blade & cartridge will not easily slide out, use a Sawstop wrench to pry it out.
*If the blade & cartridge will not easily slide out, use a Sawstop wrench to pry it out.


=== Dado Blades ===


'''Dado blades'''
==== '''Dado blades''' ====
 
Dado stack sets that have full-diameter chippers are *not* supported, as told by Sawstop support.  Use of these, even with everything properly setup, can result in the arbor being bent at the time of cartridge activation due to the significant kinetic energy & inertia resulting from the even-more-than-normal mass of this type of dado blade. Only 2-tooth 'rectangular' chippers are supported by the dado brake cartridge.
Dado stack sets that have full-diameter chippers are *not* supported, as told by Sawstop support.  Use of these, even with everything properly setup, can result in the arbor being bent at the time of cartridge activation due to the significant kinetic energy & inertia resulting from the even-more-than-normal mass of this type of dado blade. Only 2-tooth 'rectangular' chippers are supported by the dado brake cartridge.


'''Dado-Nut'''
==== '''Dado-Nut''' ====
The Dado maximum width given by SawStop is 29/32". If using a full Dado stack with the OEM Arbor Washer and Arbor Nut, the Arbor Nut may extend slightly, 1 or 2 threads beyond the end of the Arbor. While there is enough thread within the Arbor Nut on the Arbor to keep the full Dado stack secure and the direction of rotation of the blade when cutting will not loosen the Arbor Nut, there is an alternative to the OEM Arbor Washer and Arbor Nut available to get full thread engagement, the Woodpeckers Dado Nut. The Woodpeckers Dado Nut can be found in the bag with the SawStop manual attached to the front of the SawStop.


The Dado maximum width given by SawStop is 29/32". If using a full Dado stack with the OEM Arbor Washer and Arbor Nut, the Arbor Nut may extend slightly, 1 or 2 threads beyond the end of the Arbor. While there is enough thread within the Arbor Nut on the Arbor to keep the full Dado stack secure and the direction of rotation of the blade when cutting will not loosen the Arbor Nut, there is an alternative to the OEM Arbor Washer and Arbor Nut available to get full thread engagement, the Woodpeckers Dado Nut. The Woodpeckers Dado Nut can be found in the bag with the SawStop manual attached to the front of the SawStop.
==== Dado Cartlidge ====
The standard cartilage should not be used with Dado stack blades. A Dado cartridge should be installed when installing a Dado stack set. The Dado cartridge is located in the principal's office in the corner cabinate.  




Retrieved from "https://wiki.protospace.ca/Special:MobileDiff/7628"

Navigation menu