135
edits
Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183: Difference between revisions
Jump to navigation
Jump to search
Sewing Machine, Industrial Cylinder Arm Walking Foot, (Techsew TS-2750) ID:183 (view source)
Revision as of 19:13, 7 September 2024
, 7 September 2024→Startup: adding bobbin direction clarifiers
Jamie.frost (talk | contribs) |
Jamie.frost (talk | contribs) (→Startup: adding bobbin direction clarifiers) |
||
| Line 27: | Line 27: | ||
* 10" length, 3" diameter cylinder arm | * 10" length, 3" diameter cylinder arm | ||
* Needle | * Needle | ||
** | ** System: 135X17 (DPX17) | ||
** Size #18 to #24 | ** Size: #18 to #24 gauge | ||
* Thread | * Thread | ||
** Right Twist (Z) | ** Top: Right Twist (Z) | ||
** Bobbin: Right or Left (S or Z) | |||
** Size: #45-#210 | ** Size: #45-#210 | ||
* Safety Clutch protects rotary hook | * Safety Clutch protects rotary hook | ||
| Line 38: | Line 39: | ||
Almost all machine functions are covered in the Techsew youtube documentation: | Almost all machine functions are covered in the Techsew youtube documentation: | ||
https://www.youtube.com/watch?v=Qc7WBXREGpQ&list=PL4iVwH6cbP578HmtFcGT_cfE5wodn1RWf | Playlist: https://www.youtube.com/watch?v=Qc7WBXREGpQ&list=PL4iVwH6cbP578HmtFcGT_cfE5wodn1RWf | ||
Oiling: https://www.youtube.com/watch?v=IqG6p0OJkZo | |||
Threading: https://www.youtube.com/watch?v=kGQq7n6modk | |||
Startup: https://www.youtube.com/watch?v=doFv5mRpels | |||
Note: The 2750 and 2750 pro are the same machine with extra features bolted on. We have the non-pro version. The instructions are mostly the same between the models. The non-pro does not have a needle positioner. | Note: The 2750 and 2750 pro are the same machine with extra features bolted on. We have the non-pro version. The instructions are mostly the same between the models. The non-pro does not have a needle positioner. | ||
| Line 53: | Line 61: | ||
## Lubricate all oil points (red paint marks) with sewing machine oil. | ## Lubricate all oil points (red paint marks) with sewing machine oil. | ||
## Thread machine following __insert guide here__ | ## Thread machine following __insert guide here__ | ||
## Install bobbin | ## Install bobbin | ||
### Bobbin is | ### Bobbin carrier is held in with a spring latch, lift it with a fingernail or flat screwdriver, then remove the carrier+bobbin. | ||
### Install new bobbin in carrier - Thread should be wound clockwise when viewed from the 'underside' of the carrier. (bobbin will rotate clockwise when thread is pulled out). | |||
### Slide the thread under the bobbin carrier spring, and route upwards through the notch in the carrier. | |||
### Install the bobbin carrier into the machine, and lower the spring latch. | |||
### Run the threaded machine forward 1 revolution by hand to take up the bobbin thread. | |||
### Profit. | |||
=== Sew your thing === | === Sew your thing === | ||