22
edits
Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144: Difference between revisions
Jump to navigation
Jump to search
Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144 (view source)
Revision as of 17:46, 22 June 2024
, 22 June 2024→Stop Position Error (211): Added step to get past startup screen.
Jamie.frost (talk | contribs) m (→Specs: Adding/rearranging specs, formatting) |
Ian.hawkins (talk | contribs) (→Stop Position Error (211): Added step to get past startup screen.) |
||
| Line 133: | Line 133: | ||
#(Refer to the manual excerpt on the left for the following steps) | #(Refer to the manual excerpt on the left for the following steps) | ||
#Rotate the main shaft until the circled indicator disappears in the status display | #Rotate the main shaft until the circled indicator disappears in the status display | ||
#Perform a manual color change, by selecting a different color using the manual color change keys on the bottom right of the keypad. Once a different color is selected press | #Perform a manual color change, by selecting a different color using the manual color change keys on the bottom right of the keypad. Once a different color is selected press '''Set''' to confirm the manual color change. | ||
#Once the manual color change is complete you may resume your stiching. | #Once the manual color change is complete you may resume your stiching. | ||
If this happens when you first turn the machine on, the '''TEJT2-C series''' screen shows instead of the '''EMB START''' screen. The color change buttons have no effect. Change '''INITIAL:ON''' to '''INITIAL:OFF''', then press '''Set'''. Follow the steps above to clear the error. | |||