273
edits
Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144: Difference between revisions
Jump to navigation
Jump to search
Embroidery machine, CNC (Tajima TEJT II-C NEO 1501) ID:144 (view source)
Revision as of 08:28, 29 December 2022
, 29 December 2022→Quick Start: manual color change baaad
mNo edit summary |
(→Quick Start: manual color change baaad) |
||
| Line 56: | Line 56: | ||
#Load your file from USB stick by pressing the "Data" button and scrolling through the list | #Load your file from USB stick by pressing the "Data" button and scrolling through the list | ||
#"Color change:" | #"Color change:" | ||
#*auto: if you'd like the machine to just run your color order | #*'''auto''': if you'd like the machine to just run your color order | ||
#*manual: if you need to change fabrics or positions between colors/operations | #*'''manual''': if you need to change fabrics or positions between colors/operations - '''STOP HERE, INSTRUCTIONS for "manual color change" are INCOMPLETE/UNTESTED! GET DEMO/HELP WITH THIS! DO NOT PASS THIS STEP, DO NOT PRESS GO, DO NOT COLLECT CRASHED MACHINE AND BROKEN NEEDLE -''' do update these instructions once you get it reliably figured out though... | ||
#Type in your color change order - note this is in hexadecimal so 1-9 then 10 is typed using the "+10" button then 0 and shows up as A, so 11 is "+10" then 1 and will show up as B, etc. | #Type in your color change order - note this is in hexadecimal so 1-9 then 10 is typed using the "+10" button then 0 and shows up as A, so 11 is "+10" then 1 and will show up as B, etc. | ||
#Set the frame position by running a "Trace", it uses the needle/color shown on the bottom right corner | #Set the frame position by running a "Trace", it uses the needle/color shown on the bottom right corner | ||