Hot-wire foam cutter, tabletop, 14"×12" ID:118
Jump to navigation
Jump to search
 | |
| Type | Tabletop hot-wire foam cutter |
| Make/Model | Matt F single-arm |
| Serial number | 2 |
| Original owner | Matt F |
| Loan status | Donation to Protospace |
| Arrival date | June 2012 |
| Location | Under the stairs in Bay 108, all the way back in the corner on the first shelf from the floor |
| Functional status | Works |
| Usage permissions | Open to all |
| Certification | None |
| Wiki-ID | 118 |
| Label | 1.0" 1.5" 2.0" |
Specifications
- Wire: Stainless steel, 20–24 AWG
- Power: Car battery charger or computer power supply works well.
- 12 V
- 10 A
- Cut depth: ~14"
- Cut throat: ~12"
Operation & safety
| Be careful! The hot wire is under tension. If it overheats, it could break and throw molten steel at you. |
Plug it in. It heats up. Pass foam through it to cut.
If the wire breaks, contact Matt F for replacement.
History
Built by Matt F for Scoperta. Some info in this thread.