Table saw (SawStop) ID:172: Difference between revisions

Revision as of 01:10, 4 June 2023


Type	Table saw (SawStop)
Make/Model
Serial number
Original owner	Protospace
Loan status
Arrival date
Location	Wood shop
Functional status
Usage permissions
Certification	SawStop training required
Wiki-ID	172
Label	1.0" 1.5" 2.0"

Specs

10" SawStop table saw. Purchased used in 2023.

Has technology that if you accidentally touch a moving saw blade, the blade is clamped down within about 3ms, reducing or hopefully avoiding serious personal injury.

Usage

Size of blade is critical.

Sawstop recommends a blade size of 10", plus or minus 1/16". A blade may be smaller than this this due to repeated sharpening's, and the clamping cartridge cannot be adjusted properly, and that will either take longer to clamp down in case of "triggering", not allow the saw to start, or if the blade is oversize, may cause immediate triggering, failure to start or maybe other problems.

Accidentally triggering the safety feature will result in a cost of around $135 to replace the cartridge, and $80-120 to replace the blade, costs which will be the responsibility of the member.

Requirements for using this are evolving, and as this is not your typical table saw, so you have to do your due diligence and read and understand how it operates.

Wet lumber, metal particles, including staples can trigger it. So members will have to take an upgrade certification to be able to use your card to operate it!

Troubleshooting

TBD

Documentation

TBD

@@ Line 1: / Line 1: @@
-Sawstop table saw 10"
+{{Equipment page
+| toolname = Table saw (SawStop)
+| model =
+| serial =
+| owner = Protospace
+| loanstatus =
+| arrived =
+| location = Wood shop
+| status =
+| permission =
+| certification = SawStop training required
+| photo = 172.jpg
+| caption =
+| id = 172
+}}
+==Specs==
+" SawStop table saw. Purchased used in 2023.
+Has technology that if you accidentally touch a moving saw blade, the blade is clamped down within about 3ms, reducing or hopefully avoiding serious personal injury.
-{Equipment page | toolname = Sawstop 10' tablesaw | model =?
-<nowiki>| serial = ? | owner = protospace (2023) | arrived = | location = Woodworking | status = Working | permission =Certification required, cardlock installed | certification = woodworking1, with upgrade course | photo =img0465.jpg | caption = sawstop tablesaw |  id = 172 }}</nowiki>
-==Contents==
-*[[Sawstop#Specs|1 Specs]]
-*[[Sawstop#Usage|2 Usage]]
-*[[Sawstop#Troubleshooting|3 Troubleshooting]]
-*[[Sawstop#Documentation|4 Documentation]]
-*[[Sawstop#special|5 Special notes]]
-==Specs==
-TBD
 ==Usage==
-" SawStop table saw. Purchased used in 2023.
+Size of blade is critical.
-Has technology that if you accidentally touch a moving saw blade, the blade is clamped down within about 3ms, reducing or hopefully avoiding serious personal injury.
+Sawstop recommends a blade size of 10", plus or minus 1/16". A blade may be smaller than this this due to repeated sharpening's,  and the clamping cartridge cannot be adjusted properly, and that will either take longer to clamp down in case of "triggering", not allow the saw to start, or if the blade is oversize, may cause immediate triggering, failure to start or maybe other problems.
 Accidentally triggering the safety feature will result in a cost of around $135 to replace the cartridge, and $80-120 to replace the blade, costs which will be the responsibility of the member.
@@ Line 33: / Line 35: @@
 ==Documentation==
-[[File:Sawstop table saw.jpg|thumb|Sawstop tablesaw]]
+TBD
-<br />
-==Special Notes==
-Size of blade is critical.
-Sawstop recommends a blade size of 10", plus or minus 1/16". A blade may be smaller than this this due to repeated sharpening's,  and the clamping cartridge cannot be adjusted properly, and that will either take longer to clamp down in case of "triggering", not allow the saw to start, or if the blade is oversize, may cause immediate triggering, failure to start or maybe other problems.