Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
No edit summary
(Added initial Background text)
Line 15: Line 15:
}}
}}


==Specs==
==Backgroup==
TBD
This Booth was donated by Pat Spencer in response to discussion about a painting project by @David.C
 
See this Forum Post--> https://forum.protospace.ca/t/now-a-pitch-jank-booth-aka-how-jank-a-paint-booth-could-we-realistically-jank/4684/30
 
It was offered and used successfully to do the pinball game paining, and is stored in the DMZ area against the wall. 
 
Note that this is a v.10 (Early prototype) of a small portable Paint booth that servers 2 needs:
 
# Provides a low dust environment for spray painting
# Send fumes outside
 
The booth was designed to be set up and taken down using an electric screwdriver, screws, some poly, and a few 2x2's.
 
It has been suggested that this is too hard to set up and could use a revision to make it more usable.
 
There are 2 possible versions that may come out of this discussion:
 
# Make it easier to use as it is currently designed. or
# Redesign for a "use-in-Place" kind of setup that would be even easier to use.
 
Both of these suggestions have some compromises, so a review and member consensuses is needed. 


==Usage==
==Usage==

Revision as of 23:55, 13 March 2025

← Back to tools we have

Booth-Set-up-01.jpg
Type
Make/Model v1.0
Serial number N/A
Original owner Donated by Pat Spencer
Loan status Donated
Arrival date ?
Location DMZ Zone
Functional status Under Development to V2.0
Usage permissions anyone
Certification None
Wiki-ID [[]]
Label 1.0" 1.5" 2.0"


Backgroup

This Booth was donated by Pat Spencer in response to discussion about a painting project by @David.C

See this Forum Post--> https://forum.protospace.ca/t/now-a-pitch-jank-booth-aka-how-jank-a-paint-booth-could-we-realistically-jank/4684/30

It was offered and used successfully to do the pinball game paining, and is stored in the DMZ area against the wall.

Note that this is a v.10 (Early prototype) of a small portable Paint booth that servers 2 needs:

  1. Provides a low dust environment for spray painting
  2. Send fumes outside

The booth was designed to be set up and taken down using an electric screwdriver, screws, some poly, and a few 2x2's.

It has been suggested that this is too hard to set up and could use a revision to make it more usable.

There are 2 possible versions that may come out of this discussion:

  1. Make it easier to use as it is currently designed. or
  2. Redesign for a "use-in-Place" kind of setup that would be even easier to use.

Both of these suggestions have some compromises, so a review and member consensuses is needed.

Usage

TBD

Troubleshooting

TBD

Documentation

TBD