View source for Garment graphic printer, direct inject (Brother GT-361) ID:146

        {{Equipment page
        | toolname = Brother GT-3 Series Direct Inject Garment Printer
        | model = GT-361
        | serial = ??
        | owner = Robb Leece
        | loanstatus = ??
        | arrived = ??
        | location = Sewing Room
        | status = ??
        | permission = ??
        | certification = ??
        | caption = Brother GT-3 Series Direct Inject Garment Printer
        | id = 146
        }}

==Manuals==

[https://brotherdtg.com/support/files/gt3/downloads/GT3_Instruction_ENG_051313.pdf GT-3 Series Instruction Manual]

[https://www.brother-usa.com/products/bgt3610h2000012#about-product GT-3 Series Product Page]

[https://www.brother-usa.com/-/media/brother/product-catalog-media/documents/2021/01/29/18/56/gt-3-printer-brochure-2017-small.pdf GT-3 Product Brochure]

[https://brotherdtg.com/support Brother Direct-To-Garment Technical Support Page] - Pick the <code>GT-3 PRINTERS</code> section for FAQs and Downloads

<br />

==History==

==== Late 2021 ====
White cartridge is dead and non-repairable - we've tried. Story goes that it was unplugged against the warning labels, so it couldn't maintain its mandatory flush/clean cycle, and the titanium dioxide set in the lines/cartridge. Good luck getting that out. Replacement is prohibitively expensive.

White is disabled in firmware. "Lines need to be cleaned" and it'll CMY, no-K.

==== 2022-09-15 ====
Robb L has taken the DTG printer home. Legend has it he was able to fix it within 1 hour.