344
edits
Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204: Difference between revisions
Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204 (view source)
Revision as of 02:40, 8 July 2025
, 8 July→Setup Instructions:: Updated instructions for deploying paint booth
Pat.spencer (talk | contribs) |
Pat.spencer (talk | contribs) (→Setup Instructions:: Updated instructions for deploying paint booth) |
||
| Line 21: | Line 21: | ||
It was offered and used successfully to do the pinball game painting, and is stored in the DMZ area against the wall. | It was offered and used successfully to do the pinball game painting, and is stored in the DMZ area against the wall. | ||
[[File:204 PaitnBooth Collapsed.jpg|400x400px]] | |||
Note that this is a V1.0 (Early prototype) of a small portable Paint booth that servers 2 needs: | Note that this is a V1.0 (Early prototype) of a small portable Paint booth that servers 2 needs: | ||
| Line 49: | Line 51: | ||
===Step 3:=== | ===Step 3:=== | ||
* Gently begin to roll the booth over to the poly dropcloth that you have prepared. Note that the booth in it's collapsed form is quite top-heavy and may need to be opened up a bit in order to stabilize it. | * Gently begin to roll the booth over to the poly dropcloth that you have prepared. Note that the booth in it's collapsed form is quite top-heavy and may need to be opened up a bit in order to stabilize it. | ||
* Unlatch BOTH latches, one on each end, and allow it to expand slightly while it is being moved | * Unlatch BOTH latches, one on each end, and allow it to expand slightly while it is being moved. | ||
[[File:204 Paint-Booth-collapse-Latch01.jpg|267x267px]] [[File:204 Paint-Booth Roof01.jpg|300x300px]] | [[File:204 Paint-Booth-collapse-Latch01.jpg|267x267px]] [[File:204 Paint-Booth Roof01.jpg|300x300px]] | ||
*You also may have to help the roof slide up a bit as it expands. The roof is attached at the front and slides down the back as it is collapsed. | |||
*Once it is expanded to nearly it's final size, remove the spreader bar from it's storage above the door and use it to latch the walls apart. | *Once it is expanded to nearly it's final size, remove the spreader bar from it's storage above the door and use it to latch the walls apart. | ||