344
edits
Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204: Difference between revisions
Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204 (view source)
Revision as of 02:33, 8 July 2025
, 8 July→Step 3:: Added some pictures
Pat.spencer (talk | contribs) |
Pat.spencer (talk | contribs) (→Step 3:: Added some pictures) |
||
| Line 51: | Line 51: | ||
* Gently begin to roll the booth over to the poly dropcloth that you have prepared. Note that the booth in it's collapsed form is quite top-heavy and may need to be opened up a bit in order to stabilize it. | * Gently begin to roll the booth over to the poly dropcloth that you have prepared. Note that the booth in it's collapsed form is quite top-heavy and may need to be opened up a bit in order to stabilize it. | ||
* Unlatch BOTH latches, one on each end, and allow it to expand slightly while it is being moved. You also may have to help the roof slide up a bit as it expands. The roof is attached at the front and slides down the back as it is collapsed. | * Unlatch BOTH latches, one on each end, and allow it to expand slightly while it is being moved. You also may have to help the roof slide up a bit as it expands. The roof is attached at the front and slides down the back as it is collapsed. | ||
* [[File:204 Paint-Booth-collapse-Latch01.jpg|267x267px]] | |||
* Once it is expanded to nearly it's final size, remove the spreader bar from it's storage above the door and use it to latch the walls apart. | * Once it is expanded to nearly it's final size, remove the spreader bar from it's storage above the door and use it to latch the walls apart. | ||
| Line 63: | Line 64: | ||
* Connect the exhaust flex hose to the output of the fan box. Currently the Flex Hose is stored in a box in Pat.Spencer's storage. Shelf B5C. | * Connect the exhaust flex hose to the output of the fan box. Currently the Flex Hose is stored in a box in Pat.Spencer's storage. Shelf B5C. | ||
* [[File:204-PaintBooth-FlexHose-001.jpg|400x400px]] | |||
* Note: that we are in the process of making an adaptor to fit the garage door. In the meantime, just open the door a couple of feet and then drag the flex hose out as far as you need to. | * Note: that we are in the process of making an adaptor to fit the garage door. In the meantime, just open the door a couple of feet and then drag the flex hose out as far as you need to. | ||
* Note that you should put a new filter in the front of the fan unit. The previous user may have plugged the old filter with spry. We will fix this is v3 of the booth. | * Note that you should put a new filter in the front of the fan unit. The previous user may have plugged the old filter with spry. We will fix this is v3 of the booth. | ||
| Line 71: | Line 73: | ||
== Storage Instructions: == | == Storage Instructions: == | ||
These instructions are just the reverse of the deployment instructions. | (These instructions are just the reverse of the deployment instructions.) | ||
===Step 1: === | ===Step 1: === | ||