344
edits
Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204: Difference between revisions
Paint Booth, Collapsible Painting booth V1.0, Pat Spencer's ID:204 (view source)
Revision as of 04:07, 4 June 2025
, 4 June→Upgrade: updated with retractable casters
Pat.spencer (talk | contribs) |
Pat.spencer (talk | contribs) (→Upgrade: updated with retractable casters) |
||
| Line 57: | Line 57: | ||
* Rubber casters to improve the rolling on concrete. Added castors to the front wall. | * Rubber casters to improve the rolling on concrete. Added castors to the front wall. | ||
* | * | ||
it takes a | |||
v2.1 upgrades have been completed. This includes the following: | |||
* Added flip-up casters so that the booth can be dropped to the floor, which seals the gap between the walls and the floor. | |||
* plans to improve the attachment of the fan cabinet to the rear wall. This needs to be updated to all for the raising and lowering of the walls. | |||
Proposed additional upgrades: | Proposed additional upgrades: | ||
* Replace Base unit poly with a more resilient fabric dropcloth. I have purchased a 9' by 15' drop for this purpose. All that is needed is to sew up an edge so that it will be resilient. | * Replace Base unit poly with a more resilient fabric dropcloth. I have purchased a 9' by 15' drop for this purpose. All that is needed is to sew up an edge so that it will be resilient. | ||
* construct a floor sweep style air exhaust for porting the air from the booth to the outside. Adapt this to a 48"x3" low profile sweep that the door rests on. There would also be 2 48"x3" door plugs that would allow this to plug the door when deployed. The door is 12 feet wide. Concept drawing is coming | * construct a floor sweep style air exhaust for porting the air from the booth to the outside. Adapt this to a 48"x3" low profile sweep that the door rests on. There would also be 2 48"x3" door plugs that would allow this to plug the door when deployed. The door is 12 feet wide. Concept drawing is coming | ||
: the floor sweep has been designed in Fusion and a prototype will be built first. Basically a 12" hexagon which lofts to a 48" by 3" floor sweep with 10 facets. | |||
==Detailed photos (V1.0)== | ==Detailed photos (V1.0)== | ||