26
edits
Laser Cutter, Thunder Nova 51 ID:178: Difference between revisions
Jump to navigation
Jump to search
→Usage: added jog speed adjustment instructions
Michael.fiss (talk | contribs) No edit summary |
Craig.pearce (talk | contribs) (→Usage: added jog speed adjustment instructions) |
||
| Line 145: | Line 145: | ||
*[https://thunderlaser.com/laser-cutter-settings-for-different-materials/ Laser Cutter Settings For Different Materials | Thunder Laser] (note: ensure you select 130W from the top menu) | *[https://thunderlaser.com/laser-cutter-settings-for-different-materials/ Laser Cutter Settings For Different Materials | Thunder Laser] (note: ensure you select 130W from the top menu) | ||
=== Adjusting the Jog Speed === | |||
Moving the laser head around using the physical arrow buttons on the controller is referred to as jogging. To increase or decrease the jog speed, press the `Speed` button on the laser controller. In the menu that appears on screen, use the arrow buttons to increase or decrease the mm/sec value. Please note that you need to select and adjust each digit. For example, if the jog speed is set to 49mm/sec and you decrease the 9 digit, it will not cycle down to 39mm/sec after 40. You must move your cursor to the tens position and increase/decrease the 4. See the Nova [https://thunderlaser.co.uk/wp-content/uploads/2018/12/User-manual-NOVA51.pdf#page=43 instruction manual] for more info. | |||
==Troubleshooting== | ==Troubleshooting== | ||