1
edit
CNC router, wood (Precix) ID:153: Difference between revisions
Jump to navigation
Jump to search
CNC router, wood (Precix) ID:153 (view source)
Revision as of 22:09, 16 January 2023
, 16 January 2023Added "ethernet smoothstepper ran out of data" error to troubleshooting section
(more troubleshooting) |
Andres.silva (talk | contribs) (Added "ethernet smoothstepper ran out of data" error to troubleshooting section) |
||
| Line 149: | Line 149: | ||
Did someone not log out properly and Mach3 has the port locked under another user? Try rebooting the PC. | Did someone not log out properly and Mach3 has the port locked under another user? Try rebooting the PC. | ||
====== Trying to use the Z probe and the machine dive-crashes into the table at 100mph ====== | ======Trying to use the Z probe and the machine dive-crashes into the table at 100mph====== | ||
Well, don't do that. Something about the probe screen/script being lame and leaving the machine in the wrong units, from step 6 in quick start above: | Well, don't do that. Something about the probe screen/script being lame and leaving the machine in the wrong units, from step 6 in quick start above: | ||
6) Zero the Z axis using a piece of paper and ‘INCR” jog mode, or Z-PROBE. If using Z probe, first check probe speeds and distances in the probing screen. **Mach3 starts in INCH mode but the probe settings are whatever the last person left them at** Make sure you change the tool number to 99 before probing. Change the tool number to 1 or 0 after probing. | 6) Zero the Z axis using a piece of paper and ‘INCR” jog mode, or Z-PROBE. If using Z probe, first check probe speeds and distances in the probing screen. **Mach3 starts in INCH mode but the probe settings are whatever the last person left them at** Make sure you change the tool number to 99 before probing. Change the tool number to 1 or 0 after probing. | ||
====== You can help expand this list by hopefully not breaking the Precix too badly! ====== | '''Ethernet smoothstepper ran out of data in the middle of a move''' | ||
This is known to happen when messing (zooming, panning / orbiting) with the view port (3D preview). When your job is running, don't mess with it | |||
======You can help expand this list by hopefully not breaking the Precix too badly!====== | |||
<nowiki>:</nowiki>D<br /> | <nowiki>:</nowiki>D<br /> | ||