254
edits
CNC router, benchtop (SIENCI LongMill) ID:143: Difference between revisions
Jump to navigation
Jump to search
CNC router, benchtop (SIENCI LongMill) ID:143 (view source)
Revision as of 19:10, 22 October 2022
, 22 October 2022Changed Raspi to nanoPC
Pat.spencer (talk | contribs) m (Demo of a minor edit) |
Pat.spencer (talk | contribs) (Changed Raspi to nanoPC) |
||
| Line 14: | Line 14: | ||
}}<br /> | }}<br /> | ||
==Update: ( | ==Update: (10/21/2022)== | ||
The LongMill has been installed on the shelf in the "Large Projects" area, along side of the MiniCNC. | The LongMill has been installed on the shelf in the "Large Projects" area, along side of the MiniCNC. | ||
===Machine Overview=== | ===Machine Overview=== | ||
This is a SIENCI (pronounced "CNC") Labs LongMill ( See https://sienci.com/product/longmill/ ) with the short rails. The web page says it is 12"x12" but in fact it is more like 10"x13". | This is a SIENCI (pronounced "CNC") Labs LongMill ( See https://sienci.com/product/longmill/ ) with the short rails. The web page says it is 12"x12" but in fact it is more like 10"x13". | ||
| Line 29: | Line 29: | ||
'''Machine Control:''' GRBL on a SIENCI Milling Labs LONGBOARD Controller. | '''Machine Control:''' GRBL on a SIENCI Milling Labs LONGBOARD Controller. | ||
'''User Interface:''' | '''User Interface:''' The Raspberry PI that was originally installed has been replaced with a faster and more robust "nanoPC" (model nT-A3800) connected to the Controller via USB. It has [https://resources.sienci.com/view/gs-installation/ GSender], [https://winder.github.io/ugs_website/ Universal G-Code Sender (UGCS)]as well as [https://github.com/vlachoudis/bCNC bCNC] installed. | ||
''' | '''nanoPC Login''': The Debian logon on is automatic on startup, so you do not need to log on. But if you need it for any reason, it is protospace/protospace. | ||
'''Hold down method''': Screws, nails, clamps(must make these). | '''Hold down method''': Screws, nails, clamps(must make these). | ||
| Line 53: | Line 53: | ||
There are 2 power switches to be turned on (not counting the monitor). | There are 2 power switches to be turned on (not counting the monitor). | ||
*The | *The nanoPC has it's own power supply plugged into the power bar. There is a power switch on the front of the PC. | ||
*The SCENCI Longboard has a power switch. | *The SCENCI Longboard has a power switch. | ||
*And finally, when you want to start the Router, you also need to turn on the switch on the router. (Note: that this | *And finally, when you want to start the Router, you also need to turn on the switch on the router. (Note: that this may be put on a more convenient switch and even maybe software control in the future. ) | ||
| Line 62: | Line 62: | ||
* | * | ||
Once the power is turned on, you will see the Desktop | Once the power is turned on, you will see the Debian Desktop. You now need to launch one of the programs that will talk to the Controller. | ||
*UGCS Platform (Universal G-Code Sender Platform), ( https://all3dp.com/2/universal-gcode-sender/ ) | *UGCS Platform (Universal G-Code Sender Platform), ( https://all3dp.com/2/universal-gcode-sender/ ) | ||
| Line 116: | Line 116: | ||
The first training session has yet to be held at the date of writing | The first training session has yet to be held at the date of writing | ||
<br /> | <br /> | ||