Milling machine, CNC (Tormach PCNC 1100) ID:49: Difference between revisions

Jump to navigation Jump to search

Milling machine, CNC (Tormach PCNC 1100) ID:49 (view source)

Revision as of 07:55, 17 October 2022

387 bytes added ,  17 October 2022
→‎Specifications: clean up
No edit summary
Line 19: Line 19:
[[Category:Metalworking tools]]
[[Category:Metalworking tools]]
[[Category:Computer-controlled tools]]
[[Category:Computer-controlled tools]]
==Specifications==
==Specifications==
This is a PCNC 1100 series 2.


•Table Size – 34" x 9.5"   
* '''Table Size:''' 34" x 9.5"   


•Table Slots – 2 drainage/alignment slots, 3 T-Slots 0.625" (5/8") – center slot -0.00 + 0.004" – outer slots – 0.000 + 0.008"  
* '''Table Slots:'''
** two drainage/alignment slots  
** three T-Slots 0.625" (5/8")  
** center slot -0.00 + 0.004"
** outer slots 0.000 + 0.008"  


•Work envelope (X-, Y-, Z-axis) – 18" x 9.5" x 16.5"  
* '''Travel / Work Envelope (X/Y/Z):''' 18" x 9.5" x 16.5"  
* '''Rapid traverse:''' X/Y at 90 IPM, Z at 65 IPM
* '''Maximum Workpiece Weight:''' 500 lbs.
* '''Spindle Nose Diameter:''' 3 3/8"
* '''Spindle Taper:''' BT30 with spindle lock for easy single hand drawbar operation 
* '''Spindle Speed Range:''' 100 to 5140 RPM
* '''Spindle Motor:''' 1.5hp (2hp peak) induction motor
* '''Spindle Center to Column Face:''' 11"
* '''Maximum Spindle Nose to Table:''' 17" 
* '''Weight net / shipping:''' 1130 / 1325 lbs
* '''Operating temperature range:''' 7 to 38 '''°'''C


•Spindle Nose Diameter – 3 3/8"
== Features ==


•Spindle Taper – BT30 with spindle lock for easy single hand drawbar operation.
* NEMA 34 stepper motors on X, Y and Z 
* Single Shot Lube Pump
* 15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly
* Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
* Complete way covers
* Slide ways are a bonded low friction surface (PTFE filled acetyl), hand scraped slide ways with milled oil distribution slots.
* Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
* Computer controlled spindle speed and direction with regenerative braking from 1.5 hp induction motor (2 hp peak)
* Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM
* Spindle safety is enhanced with a tool change safety interlock and key switch lockout. Main spindle contactor (VFD power) is automatically disengaged when operator is changing a tool. Spindle M-codes or manual spindle start will reengage VFD power automatically after tool change is completed.
* Operator console has manual override for all spindle controls.  


•Spindle Speed Range RPM – 100 to 5140. Computer controlled spindle speed and direction with regenerative braking from a 1.5 hp induction motor (2 hp peak).
==Documentation==
 
[https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach website]
•Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM 
 
•Spindle Center to Column Face – 11"
 
•Maximum Weight of Workpiece – 500 lbs. 
 
•Max spindle nose to table – 17" 
 
•Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
 
•Weight net / shipping. – 1130 / 1325 lbs
 
•Operating temperature range 45 to 100 oF (7 to 38 oC)


•Rapid traverse X, Y = 90 IPM, Z = 65 IPM
•NEMA 34 stepper motors on X, Y and Z 
•Single Shot Lube Pump
•15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly.
•Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
•Complete way covers.
See [https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach's website] for more info.
==Documentation==
[https://tormach.com/docs/download/assetlink/asset_id/584 Operator Manual]  
[https://tormach.com/docs/download/assetlink/asset_id/584 Operator Manual]  


[https://tormach.com/docs/download/assetlink/asset_id/184 Usb related motion failures, usage note READ THIS BEFORE USING]
[https://tormach.com/docs/download/assetlink/asset_id/184 USB related motion failures, usage note READ THIS BEFORE USING]


[https://tormach.com/docs/download/assetlink/asset_id/205 Probe usage service bulletin]
[https://tormach.com/docs/download/assetlink/asset_id/205 Probe usage service bulletin]
[https://groups.google.com/g/protospace-discuss/c/9vPD54YSFsU/m/rOCAiESsAwAJ Pathpilot simulator] follow instructions on the list.
==Simulator==
==Simulator==


Gregm
248

edits

Retrieved from "https://wiki.protospace.ca/Special:MobileDiff/6118"

Navigation menu