268
edits
Hot-air rework station (GQ Electronics 5200) ID:30: Difference between revisions
Jump to navigation
Jump to search
Hot-air rework station (GQ Electronics 5200) ID:30 (view source)
Revision as of 14:44, 1 April 2022
, 1 April 2022no edit summary
m (Updated image link) |
No edit summary |
||
| Line 18: | Line 18: | ||
==Specs== | ==Specs== | ||
* 120V AC | *120V AC | ||
* Separate hot air & soldering iron | *Separate hot air & soldering iron | ||
* Separate controls: air temp, air speed, iron temp | *Separate controls: air temp, air speed, iron temp | ||
* 270W | *270W | ||
* 200–480° C/390–900° F | *200–480° C/390–900° F | ||
* Air capacity 24L/min max | *Air capacity 24L/min max | ||
* 4 air nozzle sizes | *4 air nozzle sizes | ||
* 12 soldering iron tips | *12 soldering iron tips | ||
==Usage Notes== | ==Usage Notes== | ||
* Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life | *Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life | ||
* Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off | *Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off | ||
* Careful where hot air tip is pointed, is scalding hot air capable of lighting fires | *Careful where hot air tip is pointed, is scalding hot air capable of lighting fires | ||
* Keep sponge wet and regularly tin and wipe tip to keep clean | *Keep sponge wet and regularly tin and wipe tip to keep clean | ||
* Do not bend air or soldering cords excessively, will ruin unit | *Do not bend air or soldering cords excessively, will ruin unit | ||
*[https://www.youtube.com/watch?v=SKv7b3FXeHY Watch the Demo] | |||