CNC router, wood (Precix) ID:153: Difference between revisions

Jump to navigation Jump to search

CNC router, wood (Precix) ID:153 (view source)

Revision as of 05:46, 27 November 2021

241 bytes added ,  27 November 2021
Added graphic of a finger pointing to improve readability.
(Tweaked and tested Link to Instructions Subpage.)
(Added graphic of a finger pointing to improve readability.)
Line 14: Line 14:
===Training and Documentation===
===Training and Documentation===
<hr>
<hr>
The Precix PC has both V-Carve installed as well as Mach3 to control the CNC.   
The Precix PC uses Mach3 to control the CNC.  It also has a Makerspace licensed version of VCarve Pro installed which you can use in conjunction with the Client you are going to install as per the instructions below.


<hr>
====VCarve====
'''Note:''' You can install and run VCarve Pro Makerspace Client Edition on your home PC or Laptop.  This allows you to create VCarve files that you can then bring in to Protospace and create G-Code files on the licensed workstations in the space.   
'''Note:''' You can install and run VCarve Pro Makerspace Client Edition on your home PC or Laptop.  This allows you to create VCarve files that you can then bring in to Protospace and create G-Code files on the licensed workstations in the space.   


[[File:Pngkit pointing-finger-png 65553.png|100x60px|]]
For [[VCarve-Makerspace-Client-instructions|Instructions for installing, licensing, and Using VCarve Pro Makerspace Client click here]].
For [[VCarve-Makerspace-Client-instructions|Instructions for installing, licensing, and Using VCarve Pro Makerspace Client click here]].


<hr>
====MACH3====
Mach3 has an optimized, custom screen set installed, although if you wish, you can change it back to the traditional screen.  Just remember to return it to the custom set when you are finished.  
Mach3 has an optimized, custom screen set installed, although if you wish, you can change it back to the traditional screen.  Just remember to return it to the custom set when you are finished.  


Line 30: Line 35:
</div>
</div>


====Links to Videos:====
====Links to HOW TO Videos:====


*[https://www.youtube.com/results?search_query=mach+support MACH Support YouTube Channel]
*[https://www.youtube.com/results?search_query=mach+support MACH Support YouTube Channel]
*[https://www.youtube.com/watch?v=7o_V_1AIaXE&t=4m6s "MACH3 Has Never Looked This Good."]  Video explaining our Mach3 Custom Interface that is installed on the Precix PC
*[https://www.youtube.com/watch?v=7o_V_1AIaXE&t=4m6s "MACH3 Has Never Looked This Good."]  Video explaining our Mach3 Custom Interface that is installed on the Precix PC


'''Hold down method''': The hold-down table has a grid of threaded T-Nuts that can/should be used to hold down your material. If you wish to make your own sacrificial / holding system, simply prepare to fasten it down to this grid pattern.  Use the 1/3-20 screws (or bolts if you are gentle).  
====Hold down method====
The hold-down table has a grid of threaded T-Nuts that can/should be used to hold down your material. If you wish to make your own sacrificial / holding system, simply prepare to fasten it down to this grid pattern.  Use the 1/3-20 screws (or bolts if you are gentle).  


The spacing of the threaded nuts is 4.861"  (123.63mm) on both the X and also Y axis.  Wtf is that spacing?  Why not a nice round English or Metric spacing?  Well, that is the spacing of the T-channels in the underlying bed.  Get used to it and make your templates.
The spacing of the threaded nuts is 4.861"  (123.63mm) on both the X and also Y axis.  Wtf is that spacing?  Why not a nice round English or Metric spacing?  Well, that is the spacing of the T-channels in the underlying bed.  Get used to it and make your templates.
Retrieved from "https://wiki.protospace.ca/Special:MobileDiff/5550"

Navigation menu