Chlorine test: Difference between revisions

Chlorine test (view source)

528 bytes removed , 11 September 2020

49

edits

@@ Line 3: / Line 3: @@
 ==In Brief==
-The laser can successfully cut many materials that are damaging to the laser when cut. Do not think that just because the laser can cut it, it is acceptable to do so.
+The laser can successfully cut many materials that it shouldn't.
+In particular, materials containing chlorine (like PVC) release vapor that will corrode the laser's parts and also your lungs
-In particular '''chlorinated''' materials create fumes which destroy laser components, primarily the optics. These are very expensive to replace. '''All unknown or unproven materials must have a sample tested for chlorine prior to cutting them in the laser'''.
-Burn copper wire with a torch until green flame stops. Continue heating copper wire red hot. Jab still-hot copper wire into sample piece away from flame (below flame works best). If green smoke or flame ensues, there is chlorine in the piece and it cannot be used inside the laser cutter.
 ==Known Materials==