80 watt laser engraver: Difference between revisions

Jump to navigation Jump to search
no edit summary
mNo edit summary
No edit summary
Line 10: Line 10:
*put exhaust fan outside, plug it in and cover up the gap in the bay door
*put exhaust fan outside, plug it in and cover up the gap in the bay door
*laser does not cut at lower power levels (TBD) ~ 25 - 30%. Head moves properly but no cutting (although it still may be firing)
*laser does not cut at lower power levels (TBD) ~ 25 - 30%. Head moves properly but no cutting (although it still may be firing)
*after long cuts LaserCut5.1 often looses contact with the laser, file->reconnect will often restore connectivity, if not: save your project, close LaserCut5.1 unplug the usb connector to the laser, reconnect it, restart LaserCut5.1, open your saved project.


Process notes
Process notes
35

edits

Navigation menu