844
edits
Hot-air rework station (GQ Electronics 5200) ID:30: Difference between revisions
Jump to navigation
Jump to search
m
Hot-air rework station (GQ Electronics 5200) ID:30 (view source)
Revision as of 08:37, 14 October 2014
, 14 October 2014→Usage Notes: added proper degree sign and Celsius conversion to one more temperature
Ian Oliver (talk | contribs) (→Specs: added proper degree sign and en dash to the temperature range, as well as Celsius conversion—this'll do until we get {{convert}}) |
Ian Oliver (talk | contribs) m (→Usage Notes: added proper degree sign and Celsius conversion to one more temperature) |
||
| Line 29: | Line 29: | ||
* Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life | * Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life | ||
* Do not unplug unit prior to cooldown below | * Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off | ||
* Careful where hot air tip is pointed, is scalding hot air capable of lighting fires | * Careful where hot air tip is pointed, is scalding hot air capable of lighting fires | ||
* Keep sponge wet and regularly tin and wipe tip to keep clean | * Keep sponge wet and regularly tin and wipe tip to keep clean | ||
* Do not bend air or soldering cords excessively, will ruin unit | * Do not bend air or soldering cords excessively, will ruin unit | ||