Milling machine, CNC (Tormach PCNC 1100) ID:49: Difference between revisions

Milling machine, CNC (Tormach PCNC 1100) ID:49 (view source)

Revision as of 07:55, 17 October 2022

387 bytes added , 17 October 2022

→‎Specifications: clean up

Gregm

248

edits

@@ Line 19: / Line 19: @@
 [[Category:Metalworking tools]]
 [[Category:Computer-controlled tools]]
 ==Specifications==
-This is a PCNC 1100 series 2.
-•Table Size – 34" x 9.5"
+* '''Table Size:''' 34" x 9.5"
-•Table Slots – 2 drainage/alignment slots, 3 T-Slots 0.625" (5/8") – center slot -0.00 + 0.004" – outer slots – 0.000 + 0.008"
+* '''Table Slots:'''
+** two drainage/alignment slots
+** three T-Slots 0.625" (5/8")
+** center slot -0.00 + 0.004"
+** outer slots 0.000 + 0.008"
-•Work envelope (X-, Y-, Z-axis) – 18" x 9.5" x 16.5"
+* '''Travel / Work Envelope (X/Y/Z):''' 18" x 9.5" x 16.5"
+* '''Rapid traverse:''' X/Y at 90 IPM, Z at 65 IPM
+* '''Maximum Workpiece Weight:''' 500 lbs.
+* '''Spindle Nose Diameter:''' 3 3/8"
+* '''Spindle Taper:''' BT30 with spindle lock for easy single hand drawbar operation
+* '''Spindle Speed Range:''' 100 to 5140 RPM
+* '''Spindle Motor:''' 1.5hp (2hp peak) induction motor
+* '''Spindle Center to Column Face:''' 11"
+* '''Maximum Spindle Nose to Table:''' 17"
+* '''Weight net / shipping:''' 1130 / 1325 lbs
+* '''Operating temperature range:''' 7 to 38 '''°'''C
-•Spindle Nose Diameter – 3 3/8"
+== Features ==
-•Spindle Taper – BT30 with spindle lock for easy single hand drawbar operation.
+* NEMA 34 stepper motors on X, Y and Z
+* Single Shot Lube Pump
+* 15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly
+* Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
+* Complete way covers
+* Slide ways are a bonded low friction surface (PTFE filled acetyl), hand scraped slide ways with milled oil distribution slots.
+* Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
+* Computer controlled spindle speed and direction with regenerative braking from 1.5 hp induction motor (2 hp peak)
+* Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM
+* Spindle safety is enhanced with a tool change safety interlock and key switch lockout. Main spindle contactor (VFD power) is automatically disengaged when operator is changing a tool. Spindle M-codes or manual spindle start will reengage VFD power automatically after tool change is completed.
+* Operator console has manual override for all spindle controls.
-•Spindle Speed Range RPM – 100 to 5140. Computer controlled spindle speed and direction with regenerative braking from a 1.5 hp induction motor (2 hp peak).
+==Documentation==
+[https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach website]
-•Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM
-•Spindle Center to Column Face – 11"
-•Maximum Weight of Workpiece – 500 lbs.
-•Max spindle nose to table – 17"
-•Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
-•Weight net / shipping. – 1130 / 1325 lbs
-•Operating temperature range 45 to 100 oF (7 to 38 oC)
-•Rapid traverse X, Y = 90 IPM, Z = 65 IPM
-•NEMA 34 stepper motors on X, Y and Z
-•Single Shot Lube Pump
-•15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly.
-•Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
-•Complete way covers.
-See [https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach's website] for more info.
-==Documentation==
 [https://tormach.com/docs/download/assetlink/asset_id/584 Operator Manual]
-[https://tormach.com/docs/download/assetlink/asset_id/184 Usb related motion failures, usage note READ THIS BEFORE USING]
+[https://tormach.com/docs/download/assetlink/asset_id/184 USB related motion failures, usage note READ THIS BEFORE USING]
 [https://tormach.com/docs/download/assetlink/asset_id/205 Probe usage service bulletin]
-[https://groups.google.com/g/protospace-discuss/c/9vPD54YSFsU/m/rOCAiESsAwAJ Pathpilot simulator] follow instructions on the list.
 ==Simulator==