Laser Vacuum Table

Info

Member name: Matt F

Member contact: Email, found via list.

Project name & pitch: This is a small vacuum table for the laser, to belong to Protospace, so that you can cut paper/fabric without it blowing away from the laser's air nozzle.

Storage location: Bay ?? or cart

Project start date: 31 Aug, 2013

Final Deadline: 01 Nov, 2013

Updates

• 02 Sept, 2013 - Vacuum is strapped to frame, box prototype is done. Vacuum is too loud. Considering running directly off of HVAC instead for low pressure air source.
• 12 Sept, 2013 - No progress. Laser's still down.
• 20 Sept, 2013 - No progress. Laser's still down.
• 27 Sept, 2013 - No progress. Laser's still down.
• 09 Oct, 2013 - No progress. Laser's still down.