Laser Vent Cleaning

Revision as of 23:38, 5 April 2025 by Tanner.collin (talk | contribs)

The laser vent on the roof should be cleaned every ~6 months. This page documents how.

Previous Cleanings

- 2025-04-05

Cleaning Instructions

  1. Grab a wire brush from the red cabinet in the welding area.
  2. Go up with a spotter. Take sunglasses since the white roof is very bright.
  3. Jam the red Featherlite ladder under the roof access ladder outside:
  4. Climb onto the roof. Navigate west to the lower roof and locate the laser vent:
  5. Unscrew the vent cover and brush it clean:
  6. Screw the cover back on and go back down.