Milling machine, CNC (Tormach PCNC 1100) ID:49
 | |
| Type | CNC Mill (Tormach) |
| Make/Model | PCNC 1100 Personal CNC Mill Series 2 |
| Serial number | 231 11-2006 |
| Original owner | Protospace |
| Loan status | Bought for Protospace by a group of members |
| Arrival date | ? |
| Location | Metal shop |
| Functional status | Functional |
| Usage permissions | Members Only |
| Certification | Must complete Shop Safety, Lathe Training, 3D CAD Training, CAM Training, 1 on 1 Project |
| Wiki-ID | 49 |
| Label | 1.0" 1.5" 2.0" |
Specs
This is a PCNC 1100 series 2.
•Table Size – 34" x 9.5"
•Table Slots – 2 drainage/alignment slots, 3 T-Slots 0.625" (5/8") – center slot -0.00 + 0.004" – outer slots – 0.000 + 0.008"
•Work envelope (X-, Y-, Z-axis) – 18" x 9.5" x 16.5"
•Spindle Nose Diameter – 3 3/8"
•Spindle Taper – BT30 with spindle lock for easy single hand drawbar operation.
•Spindle Speed Range RPM – 100 to 5140. Computer controlled spindle speed and direction with regenerative braking from a 1.5 hp induction motor (2 hp peak).
•Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM
•Spindle Center to Column Face – 11"
•Maximum Weight of Workpiece – 500 lbs.
•Max spindle nose to table – 17"
•Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
•Weight net / shipping. – 1130 / 1325 lbs
•Operating temperature range 45 to 100 oF (7 to 38 oC)
•Rapid traverse X, Y = 90 IPM, Z = 65 IPM
•NEMA 34 stepper motors on X, Y and Z
•Single Shot Lube Pump
•15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly.
•Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
•Complete way covers.
See Tormach's website for more info.
Useful docs
Usb related motion failures, usage note READ THIS BEFORE USING
Pathpilot simulator follow instructions on the list.