Pinball machine (Williams Road Kings) ID:129: Difference between revisions
Jump to navigation
Jump to search
Ian Oliver (talk | contribs) (→Formal: updated and organized to-do list with status icons) |
Ian Oliver (talk | contribs) (→Functional: updated to-do item statuses) |
||
Line 25: | Line 25: | ||
* <i class="fa fa-square-o"></i> Diagnose fuse blowing problem | * <i class="fa fa-square-o"></i> Diagnose fuse blowing problem | ||
** Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured) | ** Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured) | ||
* <i class="fa fa-square-o"></i> Replace left flipper solenoid | * <i class="fa fa-check-square-o"></i> Replace left flipper solenoid | ||
** This is the cause of the left flipper sticking on the down-stroke, and the repeated blowing of at least one fuse. | ** This is the cause of the left flipper sticking on the down-stroke, and the repeated blowing of at least one fuse. | ||
** <i class="fa fa-check-square-o"></i> Order new solenoid | ** <i class="fa fa-check-square-o"></i> Order new solenoid | ||
* <i class="fa fa-square-o"></i> Replace all rubber bumpers | * <i class="fa fa-check-square-o"></i> Replace all rubber bumpers | ||
** <i class="fa fa-square-o"></i> Order new bumpers | ** <i class="fa fa-check-square-o"></i> Order new bumpers | ||
* <i class="fa fa-square-o"></i> Realign flippers | * <i class="fa fa-square-o"></i> Realign flippers | ||
** They keep getting out of alignment no matter how much they are tightened. Maybe threadlocker would help? | ** They keep getting out of alignment no matter how much they are tightened. Maybe threadlocker would help? |
Revision as of 13:52, 26 May 2016
[[File:{{{id}}}.jpg|250px]] | |
Type | Pinball machine |
Make/Model | Williams Road Kings |
Serial number | ?? |
Original owner | Frollard |
Loan status | Long-term loan |
Arrival date | 2012 or earlier |
Location | Next to the large laser cutter |
Functional status | Down as of 2016-02-06 (flipper power fuse blown and left flipper sticking—see talk page for trouble/repair log) |
Usage permissions | Open to All |
Certification | Self-taught |
Wiki-ID | [[{{{id}}}]] |
Label | 1.0" 1.5" 2.0" |
Documents
Manual is available as a PDF online and on paper inside the machine.
To do
Functional
- Diagnose fuse blowing problem
- Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured)
- Replace left flipper solenoid
- This is the cause of the left flipper sticking on the down-stroke, and the repeated blowing of at least one fuse.
- Order new solenoid
- Replace all rubber bumpers
- Order new bumpers
- Realign flippers
- They keep getting out of alignment no matter how much they are tightened. Maybe threadlocker would help?
- Descale copper contacts
- Better current flow = better power from flippers
- Ian did one in Feb 2016.
- Consider replacing with a different type of switches
- [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs
- Rutger wants to do this pretty much immediately (as of Feb 2016).
- Frollard is not so optimistic, because the existing matrix depends on the incandescent bulbs' resistance, making LED replacement complicated and likely not at all power-saving.
- Resolder top front speaker wires
- Only internal speaker works; top disconnected
- Find replacement coin rejector
- Player 2 quarter slot rejector missing
Formal
- Redo exterior paint job; replace decals on side
- Repaint?
- Vinyl decal?
- Image original artwork
- Vectorize artwork
- Sand down to wood
- Prime and seal
- Reapply artwork