Pinball machine (Williams Road Kings) ID:129: Difference between revisions
Jump to navigation
Jump to search
Ian Oliver (talk | contribs) (updated functional status) |
Ian Oliver (talk | contribs) (added the sticking left flipper problem to the to-do list and also to the functional status along with a note to see the talk page for the log) |
||
| Line 7: | Line 7: | ||
| arrived = 2012 or earlier | | arrived = 2012 or earlier | ||
| location = Next to [[laser cutter, large (Rabbit Laser RL-x-1290)|the large laser cutter]] | | location = Next to [[laser cutter, large (Rabbit Laser RL-x-1290)|the large laser cutter]] | ||
| status = Down as of 2016-02-06 | | status = Down as of 2016-02-06 (flipper power fuse blown and left flipper sticking—see [[Talk:Pinball machine (Road Kings)|talk page]] for trouble/repair log) | ||
| permission = Open to All | | permission = Open to All | ||
| certification = Self-taught | | certification = Self-taught | ||
| Line 24: | Line 24: | ||
=== Functional === | === Functional === | ||
* Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured) | * Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured) | ||
* Fix left flipper sticking on the down-stroke | |||
* Replace all rubber bumpers | * Replace all rubber bumpers | ||
* Realign flippers | * Realign flippers | ||
Revision as of 09:53, 13 February 2016
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Pinball machine |
| Make/Model | Williams Road Kings |
| Serial number | ?? |
| Original owner | Frollard |
| Loan status | Long-term loan |
| Arrival date | 2012 or earlier |
| Location | Next to the large laser cutter |
| Functional status | Down as of 2016-02-06 (flipper power fuse blown and left flipper sticking—see talk page for trouble/repair log) |
| Usage permissions | Open to All |
| Certification | Self-taught |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
Documents
Manual is available as a PDF online and on paper inside the machine.
To do
Functional
- Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured)
- Fix left flipper sticking on the down-stroke
- Replace all rubber bumpers
- Realign flippers
- Descale copper contacts. Better current flow = better power from flippers
- [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs.
- Resolder top front speaker wires. Only internal speaker works; top disconnected
- Find replacement coin rejector. Player 2 quarter slot rejector missing
Formal
- Redo exterior paint job, replace decals on side (repaint? vinyl decal?)
- image original artwork
- sand down to wood
- prime and seal
- reapply artwork