Pinball machine (Williams Road Kings) ID:129: Difference between revisions
Jump to navigation
Jump to search
Ian Oliver (talk | contribs) (added photo caption) |
Ian Oliver (talk | contribs) (updated functional status) |
||
| Line 7: | Line 7: | ||
| arrived = 2012 or earlier | | arrived = 2012 or earlier | ||
| location = Next to [[laser cutter, large (Rabbit Laser RL-x-1290)|the large laser cutter]] | | location = Next to [[laser cutter, large (Rabbit Laser RL-x-1290)|the large laser cutter]] | ||
| status = | | status = Down as of 2016-02-06: flipper power fuse blown | ||
| permission = Open to All | | permission = Open to All | ||
| certification = Self-taught | | certification = Self-taught | ||
Revision as of 09:07, 13 February 2016
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Pinball machine |
| Make/Model | Williams Road Kings |
| Serial number | ?? |
| Original owner | Frollard |
| Loan status | Long-term loan |
| Arrival date | 2012 or earlier |
| Location | Next to the large laser cutter |
| Functional status | Down as of 2016-02-06: flipper power fuse blown |
| Usage permissions | Open to All |
| Certification | Self-taught |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
Documents
Manual is available as a PDF online and on paper inside the machine.
To do
Functional
- Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured)
- Replace all rubber bumpers
- Realign flippers
- Descale copper contacts. Better current flow = better power from flippers
- [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs.
- Resolder top front speaker wires. Only internal speaker works; top disconnected
- Find replacement coin rejector. Player 2 quarter slot rejector missing
Formal
- Redo exterior paint job, replace decals on side (repaint? vinyl decal?)
- image original artwork
- sand down to wood
- prime and seal
- reapply artwork