Air compressor, silent ID:112: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (Noted P&P mating.) |
||
| Line 6: | Line 6: | ||
|loanstatus=Donated to Protospace | |loanstatus=Donated to Protospace | ||
|arrived=July 2012 | |arrived=July 2012 | ||
|location= | |location=Mated with [[Pick & Place]] | ||
|status= Working (repaired 28Mar2013) | |status= Working (repaired 28Mar2013) | ||
|permission=Open to Members & Friends | |permission=Open to Members & Friends | ||
Revision as of 06:45, 10 May 2013
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Compressor |
| Make/Model | Compact 106 |
| Serial number | ?? |
| Original owner | William |
| Loan status | Donated to Protospace |
| Arrival date | July 2012 |
| Location | Mated with Pick & Place |
| Functional status | Working (repaired 28Mar2013) |
| Usage permissions | Open to Members & Friends |
| Certification | Demo/Notes Required |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
Usage Notes
- Avoid using extension cords, may trip breakers.
- Before use, check drain valve underneath, should need to be closed. DO NOT overtighten.
- After use, always drain tank. Use blowout valve first, then open drain valve underneath and leave open. DO NOT overloosen. Opening valve drains air completely but also water that has accumulated inside tank. If forgotten, tank will rust and eventually rupture. This is a big deal, remember to do it every time.
Specs
- 120V
- Originally thought to be mated with Huge Plasma Cutter. Tank capacity and flow rate are not sufficient for large or small plasma cutter. Good for Pick & Place.
- Runs very quiet compared to other compressors.
- ??
History
- Seals broken and did not build pressure past 30PSI when donated
- 02Feb2013 - Danny fixed some stuff.
- 28Mar2013 - Danny replaced the punctured hose and fittings, works great now.