3D printer, FFF (ORD Bot Hadron) ID:2: Difference between revisions
Jump to navigation
Jump to search
m (minor reformatting, replaced link with one to wayback, as the original link is dead) |
|||
| Line 23: | Line 23: | ||
2 new Ordbots were also built by Alan, including E3D Titan extruders and v6 hotends! Makes printing a lot of parts a little easier. | 2 new Ordbots were also built by Alan, including E3D Titan extruders and v6 hotends! Makes printing a lot of parts a little easier. | ||
* [https://en.wikipedia.org/wiki/Fused_deposition_modeling FDM] 3D Printer | *[https://en.wikipedia.org/wiki/Fused_deposition_modeling FDM] 3D Printer | ||
* [http://e3d-online.com/E3D-v6 E3D-v6 Extruder] | *[http://e3d-online.com/E3D-v6 E3D-v6 Extruder] | ||
==Usage Notes== | ==Usage Notes== | ||
* Capable of printing with PLA or ABS, but leave it using PLA generally to avoid jams. | *Capable of printing with PLA or ABS, but leave it using PLA generally to avoid jams. | ||
* '''Donation required if using common materials.''' | *'''Donation required if using common materials. ($0.05/g)''' | ||
Hadron II is configured to print from Repedier on the main computer in the printer room. | |||
Hadron III is experimentally configured to print from Octoprint. 172.17.18.52 | |||
Revision as of 04:06, 26 January 2023
 | |
| Type | 3D printer |
| Make/Model | ORD Bot Hadron |
| Serial number | |
| Original owner | Alan Ferguson |
| Loan status | Semi-permanent loan |
| Arrival date | Before 2014-10-29 |
| Location | 3D Printer Village |
| Functional status | Working |
| Usage permissions | Members only |
| Certification | None |
| Wiki-ID | 2 |
| Label | 1.0" 1.5" 2.0" |
Specs
Recently updated Ordbot I to E3D Titan extruder with E3D v6 hotend. 2 new Ordbots were also built by Alan, including E3D Titan extruders and v6 hotends! Makes printing a lot of parts a little easier.
- FDM 3D Printer
- E3D-v6 Extruder
Usage Notes
- Capable of printing with PLA or ABS, but leave it using PLA generally to avoid jams.
- Donation required if using common materials. ($0.05/g)
Hadron II is configured to print from Repedier on the main computer in the printer room.
Hadron III is experimentally configured to print from Octoprint. 172.17.18.52