3D Scanner (Creality RaptorX) ID:203: Difference between revisions
(added google drive shared folder link) |
(Added the location of the device since it is not mentioned anywhere) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 42: | Line 42: | ||
'''Wireless scanning,''' WiFi6 AX6000, 35.4WH battery (up to 4 hours) | '''Wireless scanning,''' WiFi6 AX6000, 35.4WH battery (up to 4 hours) | ||
==Usage== | ==Usage== | ||
The device is stored in the principal's office in the cabinet in the corner. | |||
The software is user-friendly and prompts through required steps. | The software is user-friendly and prompts through required steps. | ||
Creality Scan (Windows/Mac) - https://www.creality.com/pages/download-cr-scan-raptor | |||
Lots of tips and techniques for effective scanning: | Lots of tips and techniques for effective scanning: | ||
Latest revision as of 01:02, 12 August 2025
 | |
| Type | 3D Scanner |
| Make/Model | Creality RaptorX |
| Serial number | BCKP9430157 |
| Original owner | Protospace |
| Loan status | Owned by Protospace |
| Arrival date | March 2025 |
| Location | TBD/locker, hot potato between instructors for now |
| Functional status | Functional |
| Usage permissions | Members |
| Certification | TBD |
| Wiki-ID | 203 |
| Label | 1.0" 1.5" 2.0" |
Your Responsibility for Contents and Condition of Tool
Specs
34+7 Blue Laser Lines - Efficiency and Details - 34 cross laser lines for scanning medium to large objects quickly at 1,020,000 points/s
7 Laser Lines for Partial HD Scanning - Each laser line is as fine as 0.1mm, capturing sharper edges and richer details. Equipped with a 2.3-megapixel 3D imaging camera, it scans and restores fine details with high accuracy.
Volumetric Accuracy 0.02mm + 0.06mm/m
Laser Line Scanning - Minimum scan size: 5*5*5 mm³, Maximum scan size: 4000*4000*4000 mm³
Laser Line Scanning frame rates of up to 60fps
NIR Structured Light Scanning - Scanning objects ranging from - 150*150*150mm³-2000*2000*2000mm³
NIR frame rates of up to 30fps
Wireless scanning, WiFi6 AX6000, 35.4WH battery (up to 4 hours)
Usage
The device is stored in the principal's office in the cabinet in the corner.
The software is user-friendly and prompts through required steps.
Creality Scan (Windows/Mac) - https://www.creality.com/pages/download-cr-scan-raptor
Lots of tips and techniques for effective scanning:
Troubleshooting
Creality 3D Scanner Official Group
https://www.facebook.com/groups/creality3dscanner/
Windows - scanner cameras have wrong drivers / show as ! in Device Manager
Software should prompt to remove certain Windows Updates and reinstall Creality drivers. There's support articles regarding this as well.
It didn't work for me, but I didn't try very hard - fired right up on Mac. Update this section when you make it go on Windows.
Documentation
Links
https://www.creality.com/products/creality-raptorx-3d-scanner
Documents/photos: https://drive.google.com/drive/folders/1d2queBIim9U8R5j6F-G0RUs2dAonnmGB?usp=drive_link