Plasma cutter, huge (Powercut 1500) ID:51: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (Removed notes about White Compressor) |
||
| Line 16: | Line 16: | ||
* Cuts metal via plasma arc | * Cuts metal via plasma arc | ||
* Eye protection must be worn at all times, (welding helmet or oxy/ace goggles suffice) | * Eye protection must be worn at all times, (welding helmet or oxy/ace goggles suffice) | ||
* Leather gloves/sleeves required | * Leather gloves/sleeves required | ||
| Line 30: | Line 29: | ||
* 3ph input | * 3ph input | ||
* 20-90A output | * 20-90A output | ||
* Requires compressed air supply | * Requires high volume compressed air supply | ||
Revision as of 06:44, 10 May 2013
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Plasma Cutter |
| Make/Model | Powercut 1500 |
| Serial number | ?? |
| Original owner | William |
| Loan status | Donated to Protospace |
| Arrival date | July 2012 |
| Location | Welding/Metalworking Shop |
| Functional status | Near Functional (read Repair Notes) |
| Usage permissions | Open to Members & Friends |
| Certification | Must be certified |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
Usage Notes
- Cuts metal via plasma arc
- Eye protection must be worn at all times, (welding helmet or oxy/ace goggles suffice)
- Leather gloves/sleeves required
- Place workpiece on a raised surface, do not cut flush against floor or workbench
- Attach grounding clamp, ensure good contact (no paint)
- Set cutting power & air pressure according to workpiece thickness
- NEVER cut without air supply at sufficient pressure, requires airflow for cooling
- DO NOT make contact with tip to workplace, this melts the tip.
- Tips gradually wear out, are consumable.
Specs
- 3ph input
- 20-90A output
- Requires high volume compressed air supply