Drill press (Mastercraft) ID:42

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type	Drill Press
Make/Model	Mastercraft 10" Drill Press with Laser
Serial number	??
Original owner	Algenon
Loan status	Donated to Protospace
Arrival date	Pre 2013
Location	Metalworking Shop
Functional status	Working
Usage permissions	Open to Members & Friends
Certification	Self-Taught
Wiki-ID	[[{{{id}}}]]
Label	1.0" 1.5" 2.0"

Usage Notes

• Adjust bit with chuck key, then return chuck key to its holder
• Twist chuck by hand to ensure bit is centered, not stuck between two jaws
• Adjust table height/position by loosening rear left bolt, then turning right crank or pushing table sideways
• Ensure table hole is lined up with bit. If not, bit will drill through table and ruin it.
• Tighten rear-left bolt to secure table
• Ensure workpiece is secured
• Use depth-limiter knob to control max depth

Specs

• 10" range, 2 1/4" stroke
• 5 speeds (max 3020 RPM)
• 3.2A motor
• Battery laserline
• Worklight
• Rack & Pinion crank table adjust
• 45' tilt
• Drills holes in materials with more power and accuracy than a hand drill