Plasma cutter, small (Miller Spectrum 375) ID:52

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type	Plasma Cutter
Make/Model	Miller ??
Serial number	??
Original owner	William
Loan status	Donated to Protospace
Arrival date	July 2012
Location	Welding/Metalworking Shop
Functional status	Working
Usage permissions	Open to Members & Friends
Certification	Demo/Notes Required
Wiki-ID	[[{{{id}}}]]
Label	1.0" 1.5" 2.0"

Usage Notes

• Cuts metal via plasma arc
• Eye protection must be worn at all times, (welding helmet or oxy/ace goggles suffice)
• Leather gloves/sleeves required
• Place workpiece on a raised surface, do not cut flush against floor or workbench
• Attach grounding clamp, ensure good contact (no paint)
• Set cutting power & air pressure according to workpiece thickness
• NEVER cut without air supply at sufficient pressure, requires airflow for cooling
• Flip up red trigger safety
• Trigger is dual-mode. Tapping trigger toggles air supply on/off. Holding trigger starts plasma arc/cut
• After cutting, let air flow for several seconds to cool tip before tapping off.
• DO NOT make contact with tip to workplace, this melts the tip.
• Tips gradually wear out, are consumable.

Specs

• 120V, 20A