Laser Vent Cleaning: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
==== Cleaning Instructions ==== | ==== Cleaning Instructions ==== | ||
# Grab | # Grab a wire brush from the red cabinet in the welding area, a Philips screwdriver, and a sharpie (optional). | ||
# Go up with a spotter. Take sunglasses since the white roof is very bright. | # Go up with a spotter. Take sunglasses since the white roof is very bright. | ||
# Jam the red Featherlite ladder under the roof access ladder outside:[[File:Laser-vent-cleaning-1.png|none|thumb]] | # Jam the red Featherlite ladder under the roof access ladder outside:[[File:Laser-vent-cleaning-1.png|none|thumb]] | ||
Revision as of 00:24, 6 April 2025
The laser vent on the roof should be cleaned every ~6 months. This page documents how.
Previous Cleanings
- 2025-04-05
- 2024-09-24
- ???
- 2022-04-02
Cleaning Instructions
- Grab a wire brush from the red cabinet in the welding area, a Philips screwdriver, and a sharpie (optional).
- Go up with a spotter. Take sunglasses since the white roof is very bright.
- Jam the red Featherlite ladder under the roof access ladder outside:
- Climb onto the roof. Navigate west to the lower roof and locate the laser vent:
- Draw an alignment Sharpie line (optional), unscrew the vent cover and brush it clean:
- Screw the cover back on and go back down.
- Update this page or post on the forums that the laser vent was cleaned.
