Ultrasonic Cleaner (Unknown make/model) ID:200: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 33: | Line 33: | ||
https://forum.protospace.ca/t/ultrasonic-cleaner-installed/7382 | https://forum.protospace.ca/t/ultrasonic-cleaner-installed/7382 | ||
https://www.youtube.com/watch?v=PMEpiGXm4dw | == Videos == | ||
[https://www.youtube.com/watch?v=PMEpiGXm4dw 3D Printing Tip - Use Mylar Ziplock Bags with ultrasonic cleaner for your solvents (Youtube)] | |||
https://www.youtube.com/watch?v=4ndGpRVC2BU | [https://www.youtube.com/watch?v=4ndGpRVC2BU Ultrasonic Cleaners - Tips For Cleaning Bike Parts (Youtube)] | ||
https://www.youtube.com/watch?v=jeBB-J0fOp4 | [https://www.youtube.com/watch?v=jeBB-J0fOp4 Ultimate Tips For Using An Ultrasonic Cleaner (Youtube)] | ||
Revision as of 18:12, 28 January 2025
 | |
| Type | Ultrasonic Cleaner |
| Make/Model | Unknown make/model |
| Serial number | |
| Original owner | Protospace |
| Loan status | Owned by Protospace |
| Arrival date | 2024-08-29 |
| Location | Beside the slop sink by the Thunder |
| Functional status | Functional |
| Usage permissions | Members |
| Certification | Read the manual |
| Wiki-ID | 200 |
| Label | 1.0" 1.5" 2.0" |
Specs
TBD
Usage
- Put your part into a sealed container (glass jar, ziplock bag, mylar bag as is pictured) so your part doesn't foul the cleaner.
- Add that to the basin.
- Fill the space around the bag with tap water
Troubleshooting
TBD
Documentation
TBD
Links
https://forum.protospace.ca/t/ultrasonic-cleaner-installed/7382
Videos
3D Printing Tip - Use Mylar Ziplock Bags with ultrasonic cleaner for your solvents (Youtube)
Ultrasonic Cleaners - Tips For Cleaning Bike Parts (Youtube)