Metal Shear Brake Roll - (New Magnum 52) ID:180: Difference between revisions
Jamie.frost (talk | contribs) (New tool first add) |
(No difference)
|
Revision as of 01:43, 3 April 2024
| [[File:|250px]] | |
| Type | Metal 3-in-1 Shear, Brake, Roller |
| Make/Model | Magnum 52" |
| Serial number | ? |
| Original owner | Protospace |
| Loan status | Owned |
| Arrival date | 2024 |
| Location | Metal shop |
| Functional status | First installation/calibration in progress Apr 2024 |
| Usage permissions | Members |
| Certification | NMO |
| Wiki-ID | [[]] |
| Label | 1.0" 1.5" 2.0" |
Specs
Advertised specs:
- 52" wide
- 16 Gauge Aluminum
- 18 Gauge Mild Steel
- 9 removable fingers from 1" - 15"
- 3" slip rolls with forming grooves
Usage
ABSOLUTELY, POSITIVELY, VERY VERY NO WIRE CUTTING/BENDING WITH THE BRAKE/SHEAR. Lots of pinch points - Caution, this will cut, crush, and eat any body parts you put in the moving bits. Do not put anything squishy near anything hard or all your blood will fall out, and we'll have to call your emergency contact.
Read manual linked below to understand adjustments. The roller gears require adjustment to mesh properly or they will be damaged.
History
Replaces the identical model brought in and eventually returned to John. Thanks John! Pitch https://forum.protospace.ca/t/pitch-a-replacement-for-the-metal-shear-that-has-returned-home/4365/2 Discussion: https://forum.protospace.ca/t/3-in-1-brake-shear-roller/6179
Troubleshooting
Turn it off and then on again.