Tools we have

Notes

Fill in any data you know of/own in the following suggested format (alphabetically):

1. Tool Name (Brand/Color)
2. Tool Owner/Donator name if any.
3. Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
4. Tool Status (working/needs fixing/finicky/etc)
5. Tool Use Restrictions (Open to all, open to members only, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

3D Printing/Cutting Tools

• 80W Chinese Laser Cutter with a 4' x 3' cutting area http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
• Makerbot cupcake CNC - ?? - ?? - ?? - ??
• RapMan 3D Printer - Brian Queen - ?? - ?? - ??
• Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

Automotive Tools

• Compressor (big) - CPAA - PS Owned - Working - ??
• Floor Jack (Certified/blue) - Tremaine "Dexter" - Semi-Permanent Loan - Working - Open To All
• Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

Chemistry

• Bench Top Fume Hood (White) - James/Travis - ?? - Design Phase - ??
• Chemical Storage - James/Travis - ?? - Design Phase - ??
• Hot Plate/Stirrer (Lab Line/Orange) - James - Private - Working - Ask Owner First
• Hot Plate/Stirrer (VWR/White) - James - Semi-Permanent Loan - Working, needs new ceramic top - Ask Owner First
• Rheostat For Heating Mantle (Green) - James - Private - Working - Ask Owner First
• Solder Fume Extractors - James/Inks - ?? - Sourcing Materials - Open to All

Electronics Tools

• Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - For use with Pick & Place as long as we are protospace members - Needs plumbing and wiring fix - ??
• Lab Power Supply - ?? - ?? - ??
• Oscilloscope (Kikusui COS5060 60Mhz) - Dan Damron - Working - Open to Members Only
• Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
• Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
• Reflow SMT Station - Dan Damron - ?? - Working - Open to Members Only
• SMT Hot Air Rework Station (with soldering tools)- Dan Damron - ?? - Working - Open to Members Only

Metalworking Tools

• Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
• Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
• Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
• Compressor (White) - ?? - ?? - Needs fixing, does not hold pressure above 25 psi, paired with yellow plasma cutter - ??
• Drill Press - ?? - PS Owned - Working - Open to Members
• Forge - ?? - ?? - ?? - ??
• Lathe/Mill Combo (Craftex/Green) - Jim Akeson - Semi-Permanent Loan - Working - Must be Certified
• Plasma Cutter (Miller, Small, Blue) - ?? - ?? - Working - ??
• Plasma Cutter (Huge, Yellow) - ?? - ?? - Needs power cord, seals, paired with white compressor - ??
• Tap & Die set (Mastercraft) - Tremaine - ?? - Working - ??
• Vice (Small, Irwin) - ?? - ?? - Working - Open To All
• Vice (Giant) - Joe Piche - Donated to Protospace - Working - Open To All

Woodworking/Plastic Tools

• Band Saw (Green) - Group buy from Travis, Dan, Jim, Mike - PS Owned - Needs set screw, tensioner is broken - ??
• Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
• Cutoff Saw (B&D) - ?? - ?? - Working - ??
• Cutoff Saw (Red) - ?? - ?? - ?? - ??
• Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
• Corded Dremel & Accessories - ?? - ?? - Working - ??
• Cordless Drill (Orange) - ?? - ?? - Working - ??
• Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
• MaxNC 10 (Blue) - Brian Queen - ?? - Working - ??
• Jiggaw (Skil/Black) - ?? - ?? - Working - ??
• Joiner - Jim Akeson - ?? - ?? - ?? - ??
• Planer - ?? - ?? - ?? - ??
• Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
• Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
• Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
• Table Saw - Jim Akeson - ?? - ?? - Needs motor installed - ??
• Workmate - ?? - ?? - Working - ??

Misc Tools

• PA System & Speakers - Dan Damron - ?? - ?? - ??
• Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
• Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
• Shop Vac (Orange) - ?? - ?? - ??
• Vacuum Former - Kan - ?? - ?? - Needs serious fixing/case - ??
• Vacuum Former (complete) - Lorin - ?? - ?? - ??

Old Content To Be Merged With Above

Member tools and gadgets

Tremaine:

• 4 1 ton vehicle jack stands
• metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
• metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
• metric crescent wrenches 8mm - 24mm
• variety of wrenches, standard screwdrivers
• Metric hex key set
• tap & die set
• Heat gun
• Torque wrench
• Breaker bar with 1/2" driver
• Blowtorch (triggerstart)

(more to be added)

Mike Hermann

• Hitachi 200 MHz digital scope
• Weller Adjustable soldering station
• 2 channel 30 VDC bench supply
• Current clamps for multimeter
• Std metal working handtools
• Std wood working handtools
• Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
• Paintgun (compressor driven)
• Rotary saw
• Jigsaw
• 2.5 T rollaway jack
• Metric and Imperial wrench set
• Large torque wrench
• Shop vac
• Dremel and kit
• Bit set (std drivers, allan key, torx, torx secure, etc)
• (more to be added)

Dan VE6IBM

• 60 Mhz 3 channel scope
• (more to be added)