Heat gun (Powerfist) ID:18: Difference between revisions
Jump to navigation
Jump to search
Ian Oliver (talk | contribs) m (→Specs: spaced out units) |
m (added link to manufacturer's site) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{ | {{Equipment page | ||
|toolname=Heat | | toolname = Heat gun | ||
|model=Powerfist | | model = [https://www.princessauto.com/en/detail/electric-heat-gun/A-p8259210e;jsessionid=biEUwQcRoIjahfmOmwuiAYQB.pal-prod-com1 Powerfist 8259210] | ||
|serial= | | serial = | ||
|owner=Ben Reed | | owner = Ben Reed | ||
|loanstatus=Donated to Protospace | | loanstatus = Donated to Protospace | ||
|arrived= | | arrived = Before 2013-05-18 | ||
|location=East wall cabinets | | location = East wall cabinets | ||
|status=Working | | status = Working | ||
|permission=Open to All | | permission = Open to All | ||
|certification=None | | certification = None | ||
| | | id = 18 | ||
}} | }} | ||
==Usage notes== | |||
==Usage | |||
* Used to heat plastic until pliable | * Used to heat plastic until pliable | ||
* Used to shrink heat- | * Used to shrink heat-shrink—the [[30|hot-air rework station]] also works for this | ||
* Hot things are hot and take time to cool; don't burn yourself. | * Hot things are hot and take time to cool; don't burn yourself. | ||
| Line 28: | Line 24: | ||
* 12.5 A | * 12.5 A | ||
* 300/600° C (low/high) | * 300/600° C (low/high) | ||
==Documentation== | |||
* [https://images11.palcdn.com/hlr-system/Documents/82/825/8259/8259210_manualhb_00_01_v01.pdf Manual] | |||
[[Category:Electronics tools]] | |||
[[Category:Plasticworking tools]] | |||
[[Category:Power tools]] | |||
Latest revision as of 20:42, 22 October 2019
 | |
| Type | Heat gun |
| Make/Model | Powerfist 8259210 |
| Serial number | |
| Original owner | Ben Reed |
| Loan status | Donated to Protospace |
| Arrival date | Before 2013-05-18 |
| Location | East wall cabinets |
| Functional status | Working |
| Usage permissions | Open to All |
| Certification | None |
| Wiki-ID | 18 |
| Label | 1.0" 1.5" 2.0" |
Usage notes
- Used to heat plastic until pliable
- Used to shrink heat-shrink—the hot-air rework station also works for this
- Hot things are hot and take time to cool; don't burn yourself.
Specs
- 120 V
- 12.5 A
- 300/600° C (low/high)