File:3D printer, Yin's Wanhao.jpg: Difference between revisions

Latest revision as of 08:22, 16 June 2016

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	08:22, 16 June 2016		4,000 × 3,000 (2.89 MB)	Ian Oliver (talk \| contribs)	3D printer, FFF (Wanhao Duplicator i3)

You cannot overwrite this file.

The following 2 pages use this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot N
Exposure time	1/60 sec (0.016666666666667)
F Number	f/3
ISO speed rating	1,000
Date and time of data generation	09:12, 16 May 2016
Lens focal length	5 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
File change date and time	09:12, 16 May 2016
Y and C positioning	Co-sited
Exif version	2.3
Date and time of digitizing	09:12, 16 May 2016
Meaning of each component	Y Cb Cr does not exist
Image compression mode	3
APEX shutter speed	5.90625
APEX aperture	3.15625
APEX exposure bias	0
Maximum land aperture	3.15625 APEX (f/2.99)
Metering mode	Pattern
Flash	Flash did not fire, auto mode
Supported Flashpix version	1
Color space	sRGB
Focal plane X resolution	16,393.442622951
Focal plane Y resolution	16,393.442622951
Focal plane resolution unit	inches
Sensing method	One-chip color area sensor
File source	Digital still camera
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Scene capture type	Standard
GPS tag version	0.0.3.2
Rating (out of 5)	0