3D printer, MJM (3D Systems InVision si2): Difference between revisions
Ian Oliver (talk | contribs) (updated status: works again) |
Ian Oliver (talk | contribs) (added overview and updated functional status/dedicated laptop) |
||
| Line 7: | Line 7: | ||
|arrived = Fall 2015 | |arrived = Fall 2015 | ||
|location = 3D Printer Village | |location = 3D Printer Village | ||
|status = Functional, but must not be allowed to connect to the Internet | |status = Functional, but dedicated laptop must not be allowed to connect to the Internet | ||
|permission = Open to full members | |permission = Open to full members | ||
|certification = Demo (?) (talk to Aleks R) | |certification = Demo (?) (talk to Aleks R) | ||
| Line 18: | Line 18: | ||
{{Box.Warning|Do not allow this machine to connect to the Internet! This could render the materials we have unusable if it realizes they are expired.}} | {{Box.Warning|Do not allow this machine's host computer to connect to the Internet! This could render the materials we have unusable if it realizes they are expired.}} | ||
== Overview == | |||
This is professional 3D printer made by 3D Systems in 2003. It uses a process called Multi-Jet Modeling, which is similar to inkjet, to build a model one layer at a time. It deposits a layer, consisting of both acrylic model material and wax support material, and then cures the model material all at once using an arc lamp. After printing, the wax is melted off to expose the model. | |||
This machine must not be allowed to realized that the date has passed 2007, because it will realize that the model material is expired and refuse to use it (even though it still works). To accomplish this, it is equipped with a dedicated air-gapped laptop, which has the machine's software installed on it. Files may be transferred to this computer using flash drives or other methods that do not involve connecting it to the network. | |||
The model material is extremely hazardous in just about every imaginable way, but the support material is just common paraffin. The UV light from the arc lamp is also hazardous. | |||
== Documents == | == Documents == | ||
To do: Copy document links over from the lists | To do: Copy document links over from the lists | ||
Revision as of 03:21, 21 May 2016
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Professional 3D printer |
| Make/Model | 3D Systems InVision si2 |
| Serial number | ?? |
| Original owner | My Sewing Room / Shannon / ARCHEloft ? |
| Loan status | Unclear if donation to Protospace or long-term loan |
| Arrival date | Fall 2015 |
| Location | 3D Printer Village |
| Functional status | Functional, but dedicated laptop must not be allowed to connect to the Internet |
| Usage permissions | Open to full members |
| Certification | Demo (?) (talk to Aleks R) |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
| Do not allow this machine's host computer to connect to the Internet! This could render the materials we have unusable if it realizes they are expired. |
Overview
This is professional 3D printer made by 3D Systems in 2003. It uses a process called Multi-Jet Modeling, which is similar to inkjet, to build a model one layer at a time. It deposits a layer, consisting of both acrylic model material and wax support material, and then cures the model material all at once using an arc lamp. After printing, the wax is melted off to expose the model.
This machine must not be allowed to realized that the date has passed 2007, because it will realize that the model material is expired and refuse to use it (even though it still works). To accomplish this, it is equipped with a dedicated air-gapped laptop, which has the machine's software installed on it. Files may be transferred to this computer using flash drives or other methods that do not involve connecting it to the network.
The model material is extremely hazardous in just about every imaginable way, but the support material is just common paraffin. The UV light from the arc lamp is also hazardous.
Documents
To do: Copy document links over from the lists