Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type	Laser Cutter
Make/Model	RL1290
Serial number	??
Original owner	Brian Queen
Loan status	Semi-Permanent Loan
Arrival date	Before 2013
Location	Main Bay
Functional status	Functional
Usage permissions	Members & Friends Only
Certification	Must complete Laser Certification
Wiki-ID	[[{{{id}}}]]
Label	1.0" 1.5" 2.0"

Arguably the most popular tool at Protospace, the Laser Cutter uses a CO₂ laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

Software

We currently have LaserCut 5.3 installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 5.3 requires a USB dongle to be hooked up to the PC at all times as a form of DRM. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

Downloads

LaserCut 5.3 (Google Drive, Direct from Leetro) for Windows.
The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.

LaserCut 6.1 (Google Drive, Direct from Leetro) for Windows. Not directly compatible with our laser cutter
The full version with no restrictions. Can be used to prepare files for the earlier version of LaserCut (5.3). Both versions of LaserCut can be installed at the same time.

Resources

The Powerpoint Presentation that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your certification.

TemplateMaker, a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.

It is imperative that you do a Chlorine Test on unapproved materials before working on them with the Laser Cutter

Specs

• 80 watt
• 4x3' CNC bed
• Front shield can be dropped to insert pieces longer than 3'
• Water cooled & Ducted
• Can cut or etch up to 1/2" thick light materials such as woods and some plastics
• Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

Usage Notes

• Complete Laser Certification to learn how to use the laser. Training is offered about once a month.
• Perform a simple Chlorine Test on unapproved materials, as cutting or etching chlorinated materials damages the optics
• See Power Levels page for notes and details on cutting and etching various materials
• Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
• Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
• Consult our Laser Standard Operating Procedure

History

• Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
  • Loan has been extended.

Repairs Needed

• Upgrades discussed
  • Adding air cooling to optics and laser head block
  • Convincing power supply to modulate power levels properly
  • Seal display on controller to prevent smoke from clouding over time.