Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 13: Line 13:
|arrived=Before 2013
|arrived=Before 2013
|location=Main Bay
|location=Main Bay
|status=Functional
|status=[https://groups.google.com/forum/#!topic/protospace-discuss/qcO9pkLPBdw Limited Functionality (Nov 24, 2015)]
|permission=Members & Friends Only
|permission=Members & Friends Only
|certification=Must complete [[Laser Certification]]
|certification=Must complete [[Laser Certification]]
Line 24: Line 24:
[[Category:Textileworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]
[[Category:Computer-controlled tools]]
__TOC__
Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO<sub>2</sub> laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).
=== Software ===
We currently have '''LaserCut 5.3''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 5.3 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement.
==== Downloads ====
''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro])
The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program).




Revision as of 08:27, 25 November 2015

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type Laser Cutter
Make/Model RL1290
Serial number ??
Original owner Brian Queen
Loan status Semi-Permanent Loan
Arrival date Before 2013
Location Main Bay
Functional status Limited Functionality (Nov 24, 2015)
Usage permissions Members & Friends Only
Certification Must complete Laser Certification
Wiki-ID [[{{{id}}}]]
Label 1.0" 1.5" 2.0"



Arguably the most popular tool at Protospace, the Laser Cutter uses a CO2 laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).

Software

We currently have LaserCut 5.3 installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 5.3 requires a USB dongle to be hooked up to the PC at all times as a form of DRM. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement.

Downloads

LaserCut 5.3 (Google Drive, Direct from Leetro)

The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program).


It is imperative that you do a Chlorine Test on unapproved materials before working on them with the Laser Cutter


Specs

  • 80 watt
  • 4x3' CNC bed
  • Front shield can be dropped to insert pieces longer than 3'
  • Water cooled & Ducted
  • Can cut or etch up to 1/2" thick light materials such as woods and some plastics
  • Cannot cut any chlorinated synthetics (some types of plastics & rubbers)

Usage Notes

  • Complete Laser Certification to learn how to use the laser. Training is offered about once a month.
  • Perform a simple Chlorine Test on unapproved materials, as cutting or etching chlorinated materials damages the optics
  • See Power Levels page for notes and details on cutting and etching various materials
  • Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
  • Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
  • Consult our Laser Standard Operating Procedure

History

  • Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.
    • Loan has been extended.

Repairs Needed

  • Upgrades discussed
    • Adding air cooling to optics and laser head block
    • Convincing power supply to modulate power levels properly
    • Seal display on controller to prevent smoke from clouding over time.
Retrieved from "https://wiki.protospace.ca/index.php?title=Laser_cutter,_large_(Rabbit_Laser_RL-80-1290)_ID:6&oldid=1772"