Laser Vacuum Table: Difference between revisions
Jump to navigation
Jump to search
m (→Updates) |
|||
| Line 19: | Line 19: | ||
*''' 02 Sept, 2013 -''' Vacuum is strapped to frame, box prototype is done. Vacuum is too loud. Considering running directly off of HVAC instead for low pressure air source. | *''' 02 Sept, 2013 -''' Vacuum is strapped to frame, box prototype is done. Vacuum is too loud. Considering running directly off of HVAC instead for low pressure air source. | ||
*''' 12 Sept, 2013 -''' No progress. Laser's still down. | *''' 12 Sept, 2013 -''' No progress. Laser's still down. | ||
*''' 20 Sept, 2013 -''' No progress. Laser's still down. | |||
[[Category:OngoingProjects]] | [[Category:OngoingProjects]] | ||
Revision as of 23:41, 20 September 2013
Info
Member name: Matt F
Member contact: Email, found via list.
Project name & pitch: This is a small vacuum table for the laser, to belong to Protospace, so that you can cut paper/fabric without it blowing away from the laser's air nozzle.
Storage location: Bay ?? or cart
Project start date: 31 Aug, 2013
Final Deadline: 01 Nov, 2013
Updates
- 02 Sept, 2013 - Vacuum is strapped to frame, box prototype is done. Vacuum is too loud. Considering running directly off of HVAC instead for low pressure air source.
- 12 Sept, 2013 - No progress. Laser's still down.
- 20 Sept, 2013 - No progress. Laser's still down.