View source for Hot-air rework station (GQ Electronics 5200) ID:30

{{Equipment page
| toolname=Hot Air & Soldering Iron Rework Station
| model=GQ 5200 SMD Rework Soldering Station
| serial=???
| owner=Donated by purchase: Wes, Wil, Travis, Mike M, Peter, Shannon, Jorgen, Daryl, & James
| loanstatus=Owned by Protospace
| arrived=05 May 2013
| location=Electronics Workroom
| status=Working
| permission=Open to Members
| certification=Demo required
| id=30
| itemphoto=[[File:30.jpg|350px|thumb|right|]]
}}

[[Category:Electronics tools]]

==Specs==

*120V AC
*Separate hot air & soldering iron
*Separate controls: air temp, air speed, iron temp
*270W
*200–480° C/390–900° F
*Air capacity 24L/min max
*4 air nozzle sizes
*12 soldering iron tips

==Usage Notes==

*Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life
*Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off
*Careful where hot air tip is pointed, is scalding hot air capable of lighting fires
*Keep sponge wet and regularly tin and wipe tip to keep clean
*Do not bend air or soldering cords excessively, will ruin unit
*[https://www.youtube.com/watch?v=SKv7b3FXeHY Watch the Demo]