View source for Drill press, 8" (Jobmate) ID:69

{{Template:EquipmentPage
|toolname=Drill Press
|model=Jobmate 8"
|serial=??
|owner=Thomas L
|loanstatus=Long term loan
|arrived=Fall 2010
|location=Woodworking Shop
|status=Working
|permission=Open to Members & Friends
|certification=Self-Taught
|itemphoto=[[File:Drill_Press_Jobmate.jpg|350px|thumb|right|]]
}}

[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Machine tools]]

==Usage Notes==

* There are 3 belt settings, ensure the belt setting is correct for the material
* Adjust bit with chuck key, then return chuck key to its holder
* Twist chuck by hand to ensure bit is centered, not stuck between two jaws
* Adjust table height/position by loosening rear left bolt, then lifting the table manually (twisting left and right helps)
* Ensure table hole is lined up with bit. If not, bit will drill through table and ruin it (note existing "extra" hole)
* Tighten rear-left bolt to secure table
* Ensure workpiece is secured

==Specs==

* Jobmate Bench Drill Press, 8-in
* Adjustable depth stop for accurate measurement. Tilting table with clamping slots. Column to chuck is 4" (10.16cm). 1/2" keyed chuck